One of Us
| Mine is chambered for the 700 AHR, so i guess that wouldn't help, unless you plan to shoot cases that look like Budweiser cans! |
| Posts: 20237 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009 | 
IP
|
|
One of Us
| The bolt face has to be approximately the same as the case head. (.635???) So what is the question? |
| Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003 | 
IP
|
|
One of Us
| Duane!!! Taking a break from toiling over my Heyms? |
| Posts: 20237 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009 | 
IP
|
|
One of Us
| I was wondering if their is any differene in left lug shape or size between the two. If one or the other would be a better choice for enlarging the face to take the .577 Tyrannosaur. |
| Posts: 534 | Location: Baltimore, MD | Registered: 21 July 2008 | 
IP
|
|
one of us
| The PH should handle the trex ok. The recess only has to be machined out about .050" for trex rim. PH bolt diameter handles my 700HE ok with recess made .135" bigger.But you can get more than trex with my 585HE and use Gibbs bolt. I've done it.Ed
MZEE WA SIKU
|
| |