Go | New | Find | Notify | Tools | Reply |
one of us |
The .700 BMG IMP can push a 1000 grain bullet at 3000-3100 FPS with a .36 INCH barrel. But when it have a .26 inch barrel it only get around 2800 FPS with a 1000 grainer. with around 320 grains powder And if the .600 OK-1 can push a 900 grainer at 2300 fps. i think the .600 OK-3 van get a 900 grainer up to 2600-2700 FPS with a 26-28 inch barrel. So the .700 BMG IMP is not so much more powerfull than a .600 OK Robgunbuilder, Hubel!?! How many grains powder does a .600 OK-3 take with a MAX load with a 900 grainer??? Just some toughts! // OK | ||
|
one of us |
Oh about 185 grs of H414. That ought to hurt!-Rob | |||
|
one of us |
Thanks RGB! do you think it will make 2600-2700 FPS with a 28 inch barrel? //OK | |||
|
Moderator |
Jesu, OK, you are aptly named Since I am a non-brake shooter, I can't even begin to imagine totting a 16# rifle, that has a stock, essentially, of tig welded mercury tubes!!! I would like to watch someone else shoot one of those, but I know my absolute limit is a 577 nitro. The 500 jeffe makes me pay enough attention, but it sure makes EVERYTHING else I have feel like a 22. But, if i had to choose one, of these behemouths, it would be the 600ok, as it can fit on a sporting action. I haven't seen anything that fits that for a bmg based monster, except single shots. here's an Idea... shorten the 50 to, say, 3", and make it fit in a 550? jeffe | |||
|
one of us |
Overkill, I don't know what Rob's 600 OK-3 is but any case with 185gns powder will not be clocking up much more than 2500fps with 900gn and a 26" barrel. 35% less power than the 700BMG. Karl. | |||
|
one of us |
Rob, actually I was wondering about a test you did on wood I think with your various calibres and solids. How did the 700Bmg stack up against the other hunting calibres and the 50BMg itself for penetration? Karl. | |||
|
one of us |
Karl! I think that Rob or Hubel said that the .600 OK-3 with a 26-28 inch barrel will reach 2600FPS or more.. | |||
|
one of us |
I gave a figure of 2600 fps based on me thinking that the OK-3 would be holding more powder than Rob mentioned, due to the fact that it had a case .3 in longer.I am referring to a slightly compressed load of ball powder, H414 or W-760. About 200 gr in a 28 in barrel. The OK is 3 in long and OK-3 is 3.3 in long.Ed. | |||
|
one of us |
Overkill, that's still over 200fps less than the and with a lighter bullet. If you want to juggle figures like that you can make the 458win look no more powerful than the 45-70. karl. | |||
|
one of us |
Karl! Yes, but you can use the .600 OK for hunting.. tell me how you are going to carry a 15 kg (30 ibs).700 BMG IMP a hole day? No way! | |||
|
one of us |
Tsk!Tsk! Don't go slipping off into other realms Overkill. Your point was the 700 is not much more powerful than the 600 and my point was 35% more power is generally considered 'a f ***** shitload more power' in the firearms world. Karl. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia