The Accurate Reloading Forums
.600 Overkill V&S .700 BMG IMP

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/93910308

19 September 2003, 06:02
Overkill
.600 Overkill V&S .700 BMG IMP
The .700 BMG IMP can push a 1000 grain bullet at 3000-3100 FPS with a .36 INCH barrel.
But when it have a .26 inch barrel it only get around 2800 FPS with a 1000 grainer. with around 320 grains powder [Eek!]

And if the .600 OK-1 can push a 900 grainer at 2300 fps. i think the .600 OK-3 van get a 900 grainer up to 2600-2700 FPS with a 26-28 inch barrel.

So the .700 BMG IMP is not so much more powerfull than a .600 OK

Robgunbuilder, Hubel!?!
How many grains powder does a .600 OK-3 take with a MAX load with a 900 grainer???

Just some toughts! // OK
19 September 2003, 16:00
Robgunbuilder
Oh about 185 grs of H414. That ought to hurt!-Rob
21 September 2003, 09:57
Overkill
Thanks RGB! do you think it will make 2600-2700 FPS with a 28 inch barrel?

//OK
21 September 2003, 01:00
jeffeosso
Jesu, OK, you are aptly named

Since I am a non-brake shooter, I can't even begin to imagine totting a 16# rifle, that has a stock, essentially, of tig welded mercury tubes!!!

I would like to watch someone else shoot one of those, but I know my absolute limit is a 577 nitro. The 500 jeffe makes me pay enough attention, but it sure makes EVERYTHING else I have feel like a 22.

But, if i had to choose one, of these behemouths, it would be the 600ok, as it can fit on a sporting action. I haven't seen anything that fits that for a bmg based monster, except single shots.

here's an Idea...

shorten the 50 to, say, 3", and make it fit in a 550?

jeffe
21 September 2003, 23:24
Karl
Overkill,
I don't know what Rob's 600 OK-3 is but any case with 185gns powder will not be clocking up much more than 2500fps with 900gn and a 26" barrel.

35% less power than the 700BMG.

Karl.
21 September 2003, 23:25
Karl
Rob,
actually I was wondering about a test you did on wood I think with your various calibres and solids.
How did the 700Bmg stack up against the other hunting calibres and the 50BMg itself for penetration?

Karl.
22 September 2003, 02:24
Overkill
Karl!

I think that Rob or Hubel said that the .600 OK-3 with a 26-28 inch barrel will reach 2600FPS or more..
22 September 2003, 04:02
Grandpasez
I gave a figure of 2600 fps based on me
thinking that the OK-3 would be
holding more powder than Rob mentioned, due to the fact that it had a case .3 in longer.I am referring to a slightly compressed load of ball powder, H414 or W-760. About 200 gr in a 28 in barrel. The OK is 3 in long and OK-3 is 3.3 in long.Ed.
26 September 2003, 02:14
Karl
Overkill, that's still over 200fps less than the and with a lighter bullet.

If you want to juggle figures like that you can make the 458win look no more powerful than the 45-70.

karl.
26 September 2003, 05:04
Overkill
Karl!

Yes, but you can use the .600 OK for hunting.. tell me how you are going to carry a 15 kg (30 ibs).700 BMG IMP a hole day?
No way!
26 September 2003, 11:49
Karl
Tsk!Tsk! Don't go slipping off into other realms Overkill. [Roll Eyes]

Your point was the 700 is not much more powerful than the 600 and my point was 35% more power is generally considered 'a f ***** shitload more power' in the firearms world. [Wink]

Karl.