THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    what is your most accurate round for the 458?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
what is your most accurate round for the 458? Login/Join
 
<Dr. John>
posted
I am looking for info regarding my favorite cartridge...the 458 win mag. what is your most accurate loading? which rifle are you shooting it from? I am trying looking to load some ammo but experimenting with different bullets is very expensive. so far I have tried: sierra 300gr HP, BarnesX 300gr, and Cast Performance 440gr. Poor accuracy. I am considering going back to the good old bullet it was designed for...the large Hornady 500gr soft point.
 
Reply With Quote
<500 AHR>
posted
Dr. John,

Does your rifle have a custom chamber or is it production. The reason being that many production chamber have extremely long throats.

In my experience with two 458 Win Mags one custom the other a M70 Supergrade the longer heavier bullets shoot best. In both of my rifles the 300 - 350 grain bullets would post 3-5 inch groups at 100 yards. The 405 Remington would print around 2 - 2.5 and the 500 Hornandy with a heavily compressed charge of IMR3031 (which I used exclusively) would make it down to 1.5 inches.

Additional note. I never had a cast bullet that would print either of my rifles. Loaded to 1500 fps or so I could get 4 inch groups at 50 yards. Loaded to 2000 fps range I was luck to hit a 12 square at 100 yards.

Just I hope this information was helpful.

Todd

 
Reply With Quote
<Dr. John>
posted
Todd,
the barrel came in 458 cal. but was reamed by the gunsmith with a standard reamer so I am assuming the throat is long.

I was very dissapointed with the cast bullets. I thought I found a great affordable bullet for practice and hunting.

I have also considered bullets from Hawk. they make heavy semi-spitzer bullets but I am not sure as to the performance of these.
If anyone has any experience with them I would like to know.

Woodleighs are nice also but more pricy. accuracy?

how about swift bullets?

how about the heavy Barnes X?

I would prefer lighter bullets but I do not think they will work well in the 458.

 
Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Dr. John:
I am looking for info regarding my favorite cartridge...the 458 win mag. what is your most accurate loading? which rifle are you shooting it from? I am trying looking to load some ammo but experimenting with different bullets is very expensive. so far I have tried: sierra 300gr HP, BarnesX 300gr, and Cast Performance 440gr. Poor accuracy. I am considering going back to the good old bullet it was designed for...the large Hornady 500gr soft point.

Hornady 350g rn Win brass, 68.0g H4198, CCI250 or Fed.215, OAL 2.960 & Crimped, will shoot 1" groups @ 100yds & 3" @ 200yds all day long in a VZ-24 Mauser with a 22" Shilen BBl.that I put together this December. 500g Hornady W/62g H4198 are also 1" or less @ 100yds. These were the first loads I tried in this rifle, I think I found the hot ticket!

 
Posts: 2361 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
one of us
posted Hide Post
This is the loads I use so far

Speer 350gr with 73gr Normas N200, 1" three shots at 100m, 2570ft/s, This will be my hunting load.
Lee 450gr Cast with 15gr Red Dot, five shots 2,3" and ten shots 2,5" at 100m, 1120ft/s This is my off bench practicing load. Both loads are crimped else I will have flyers all over/
PerN

 
Posts: 108 | Location: Härnösand Sweden | Registered: 17 June 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    what is your most accurate round for the 458?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia