one of us
| Cast Performance has some 525-grain WFNGC that I use with my 50 Alaskan. I will also use this bullet with my 50-caliber wildcat when it's ready. Good luck. http://www.castperformance.com/ |
| Posts: 1002 | Location: Midwest USA | Registered: 01 September 2001 |
IP
|
|
one of us
| |
| Posts: 1002 | Location: Midwest USA | Registered: 01 September 2001 |
IP
|
|
One of Us
| Mingo, I ordered some beartooths but my order is still 3 or 4 months out. I checked the cast perfomance online catalog but they were only listing bullets up to .500 diameter. Did I miss it? Thanks. |
| Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002 |
IP
|
|
one of us
| 500grains, Wanye Doudna does a .512 plain base 660 grainer for $10 per 100.
Brian. |
| Posts: 529 | Location: Humboldt County,CA | Registered: 23 May 2002 |
IP
|
|
One of Us
| Whoa!
Who is Wayne Dounda and how do I contact him?
Thanks. |
| Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002 |
IP
|
|
one of us
| 500grains,
They apparently screwed up the number on their website. I have been buying .510 cast bullets from them for three years now. Both my 50 Alaskan and 500 Linebaugh are .510 diameter. In fact, I just got a shipment of 525-grain from them about 2 months ago and it measured at around .511. Give them a call to clear this up. Have fun! |
| Posts: 1002 | Location: Midwest USA | Registered: 01 September 2001 |
IP
|
|
one of us
| If you want a bit more FPS, cast performance makes a 435 grain WFNGC also in .510 - very good quality bullets and the folks are great to talk with - KMule |
| Posts: 1300 | Location: Alaska.USA | Registered: 15 January 2002 |
IP
|
|
one of us
| 500grains, I sent you an e-mail with his phone #.Let me know what happens.
Brian. |
| Posts: 529 | Location: Humboldt County,CA | Registered: 23 May 2002 |
IP
|
|
One of Us
| Thanks guys. I will follow up with these leads. |
| Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002 |
IP
|
|
Moderator
| I make a 470 gr LFN, a little lighter then you are after, but it should make a good mild to medium power round. |
| |
one of us
| Dry Creek Bullets has my 460gr SWC mould and is selling them if you after pistol bullets. |
| |
one of us
| HI,
I have used Cast Performance's 525 grain WFN in my 50-110 they are very good. I also have talk to them on the phone and I think I remember they said they would make the same WFN in a 550 grain?.Thanks,Kev |
| |