THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Plinking Load for the 444 Marlin

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Plinking Load for the 444 Marlin Login/Join
 
one of us
Picture of JBoutfishn
posted
Looking for a light plinking load for the 444 Marlin used in a Model 94 "Big Bore". Any problem
using the Hornady 200 gr Hollow Point? Does 4198 have a problem when loading down?

Jim
 
Posts: 3014 | Location: State Of Jefferson | Registered: 27 March 2002Reply With Quote
one of us
Picture of MacD37
posted Hide Post
JBoutfishn, All 444 Marlin loads are plinkers! [Wink] couldn't resist! Sorry!

The 240 gr Speer pistol bullet can be pushed as low as 2036 FPS with 55.0 grs of IMR4320, or 2039 FPS with 53.0 grs of N201. These are MINIMUM LOADS with those powders, and all other powders get higher velocities with the minimum loads. The lowest velocity I can find with IMR 4198 is a load of 42.0 grs of it for a minimum velocity of 2121 fps. All these loads are from a Marlin with a 24" barrel, and are from the Speer load book No 10.
Enjoy! [Wink]
 
Posts: 14634 | Location: TEXAS | Registered: 08 June 2000Reply With Quote
one of us
Picture of JBoutfishn
posted Hide Post
Thanks Mac, after a morning of "plinking" with the 416 and 470, I just wanted to shoot over open sights with getting beat up. [Wink]
 
Posts: 3014 | Location: State Of Jefferson | Registered: 27 March 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Plinking Load for the 444 Marlin

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia