THE ACCURATERELOADING.COM BIG BORE FORUMS

Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
375 H&H - 235 gr. Speer Login/Join
 
One of Us
posted
I'm going to try this load on deer this year .
375 H&H - 235 grain Speer semi spit.
67.2 grains IMR 3031 - CCI200 prim . 2750 MV.

What do you think , does anybody else use this bullet ..and what are your results ..

I just want to use my 375 H&H more often ..


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
One of Us
posted Hide Post
I've used the 235 Speer in the 375 H&H but in my testing of it on water-filled jugs it opened much quicker than I prefer, but for broadside shots on deer it should be fine. I much prefer the 250 Sierra.
 
Posts: 1421 | Location: WA St, USA | Registered: 28 August 2016Reply With Quote
One of Us
posted Hide Post
A good friend of mine tried them. They coppered his bore pretty badly. Shot well but it was Booger getting his rifle clean. Barnes TSX works well in my rifle, 235 gr.


Guns and hunting
 
Posts: 1137 | Registered: 07 February 2017Reply With Quote
One of Us
posted Hide Post
Thanks guys , I'm going to try them ..
I agree that copper fouling is a PIA sometimes, I just ordered some KG-12 copper remover from midway ..just in case ..

Some guns seem prone to fouling more Than others , not sure why ..maybe a smooth or rough bore ..? ..


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
One of Us
Picture of sambarman338
posted Hide Post
As I recall, Elmer Keith thought the 235-grainers ideal for woodchucks. Wink
 
Posts: 5166 | Location: Melbourne, Australia | Registered: 31 March 2009Reply With Quote
one of us
posted Hide Post
I punched paper with several boxes of them. This was decades ago - had a M-700 Rem KS mountain. Wish I'd kept it.

No copper fouling issue.

Was using various charges of IMR-3031. Think between 60 and 65 gr. Reduced recoil weenies. Would have to dig up the chrono numbers. But they grouped very well.

Writers, Keith and Taylor included, bashed older 235 gr types. But the author on ballisticstudies.com speaks highly of the Hotcor 235 gr Speer on game.

Will mess with some 235 and 270 gr Speers in the .375R next summer.
 
Posts: 670 | Location: Dover-Foxcroft, ME | Registered: 25 May 2002Reply With Quote
one of us
Picture of MacD37
posted Hide Post
I've shot everything from whitetail deer to Hippo with a 375 H&H mag bolt rifle, using a 300 gr Nosler partition, and see no need for any other bullet. The rifle's irons and scope are both set 3 inches high @ 100 yds, and it is dead zero at 200 yds and only 4 inches low at 250 yds.

That cartridge is 2550 fps at muzzle and will kill anything it hits in boiler room. With the rifle set this way no matter what you are hunting the hold on target is the same.


..375H&H mag one rifle for the world! old


....Mac >>>===(x)===> MacD37, ...and DUGABOY1
DRSS Charter member
"If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982

Hands of Old Elmer Keith

 
Posts: 14634 | Location: TEXAS | Registered: 08 June 2000Reply With Quote
one of us
Picture of Pa.Frank
posted Hide Post
I tried them when I first got my 375... i couldn't get them to group under 2"

I like the Speer 285 SP for accuracy. Best I have found for accuracy out of my Sako AV


NRA Benefactor.

Life is tough... It's even tougher when you're stupid... John Wayne
 
Posts: 1984 | Location: The Three Lower Counties (Delaware USA) | Registered: 13 September 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by MacD37:
I've shot everything from whitetail deer to Hippo with a 375 H&H mag bolt rifle, using a 300 gr Nosler partition, and see no need for any other bullet. The rifle's irons and scope are both set 3 inches high @ 100 yds, and it is dead zero at 200 yds and only 4 inches low at 250 yds.

That cartridge is 2550 fps at muzzle and will kill anything it hits in boiler room. With the rifle set this way no matter what you are hunting the hold on target is the same.


..375H&H mag one rifle for the world! old




Beware of the man with one gun , they shoot it very well !!


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
One of Us
posted Hide Post
Take a look at Cutting Edge Bullets 230 grain bullet for the 375 H&H. I have not shot anything with it yet, but it groups well out of my Ruger #1 and hits 3000 fps.
 
Posts: 2173 | Location: NORTHWEST NEW MEXICO, USA | Registered: 05 March 2008Reply With Quote
One of Us
Picture of cal pappas
posted Hide Post
The Speer 235s were fine for several plains game critters back in my single barrel days. I still have a good supply but no rifle for them. Maybe someday...
Cal


_______________________________

Cal Pappas, Willow, Alaska
www.CalPappas.com
www.CalPappas.blogspot.com
1994 Zimbabwe
1997 Zimbabwe
1998 Zimbabwe
1999 Zimbabwe
1999 Namibia, Botswana, Zambia--vacation
2000 Australia
2002 South Africa
2003 South Africa
2003 Zimbabwe
2005 South Africa
2005 Zimbabwe
2006 Tanzania
2006 Zimbabwe--vacation
2007 Zimbabwe--vacation
2008 Zimbabwe
2012 Australia
2013 South Africa
2013 Zimbabwe
2013 Australia
2016 Zimbabwe
2017 Zimbabwe
2018 South Africa
2018 Zimbabwe--vacation
2019 South Africa
2019 Botswana
2019 Zimbabwe vacation
2021 South Africa
2021 South Africa (2nd hunt a month later)
______________________________
 
Posts: 7281 | Location: Willow, Alaska | Registered: 29 June 2009Reply With Quote
one of us
posted Hide Post
The Speer will not copper foul a .375 bore but a Barnes X 235 gr. will or any copper monolithic will.

Ive shot plains game with it an it worked great, a friend of mine uses it on elk regularly an loves them..

I suspect any animal you shoot with a 375 will keel right over pretty quick, maybe a short run sometimes, even with a 300 or 350 gr. bullet!! shocker least that's been my experience.

I only use two bullets in the 375 these days a 300 gr.Nosler and a 350 gr. Woodleigh soft/solid. They work on everything that walks, talks, crawls, swims or flys.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Thanks guys . I recently came across 10 boxes of handloads in the 375H&H - 235 gr. Speer - 67.2 gr. IMR3031 - 2750MV

If these shoot minute of deer at 100 yards -
I'm going hunting ... BOOM

I'm used to killing deer with 25/06 or 257 Roberts , the 375 will make a little bigger hole :-)


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
one of us
posted Hide Post
Not to be a total asshole, but I sense that you had already made up your mind, and didn't pay much attention to some very good feedback from some very experienced hunters and shooters.


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
One of Us
posted Hide Post
What's your point lawndart ?
I had already acquired these handloads and wanted some opinions pro or con

I very much appreciate and pay attention to this feedback . I value opinions of all responders to my inquirie..

This is a special opportunity to get professional advice

I even value your opinions, sometimes :-)


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
One of Us
posted Hide Post
I have shot them and while getting good accuracy I just stayed with my 300 go TSX. Why, because I have killed so many animals with it of all sizes from deer and impala to numerous buffalo and eland and have NEVER had a problem with it. It kills small thin skinned game like deer well with little meat damage if any and kills the big stuff just as well. One load, one trajectory, one scope zero and simplicity and reliability. All good and no bad.
 
Posts: 898 | Registered: 25 February 2009Reply With Quote
one of us
Picture of Blacktailer
posted Hide Post
In 235's I've used the Speer and TSX. Both are very accurate in my M70. You can over drive the light bullets and end up with more meat damage and the BC sucks but that shouldn't effect ballistics unless you are shooting past 350-400 yards.
If they shoot in your rifle, use 'em.


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
 
Posts: 3831 | Location: Cave Creek, AZ | Registered: 09 August 2001Reply With Quote
One of Us
posted Hide Post
That was my go-to round when hunting spot-n-stalk Black Bears in British Columbia for years. It does the trick.
 
Posts: 20175 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
posted Hide Post
Thanks guys - really appreciate the feedback.


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
fairly soft.. great for lower 48 .. i love them in the 376 steyr


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
You can always use the 225 grain hornady inter-lok too for deer.
 
Posts: 966 | Location: Austin, Texas | Registered: 23 September 2011Reply With Quote
one of us
Picture of Fjold
posted Hide Post
I experimented with a number of light weight .375 bullets. All of them shot three shot groups under an inch at 100 yards.

235 grain CEB Raptor ER with 85 grains of BLC-2 at 3099 fps but it's a varmint bullet not suitable for big game.

200 grain ACP (Australian copper projectiles) with 87 grains of BLC-2 for 3204 fps

235 grain Barnes TSX with 78 grains of R-15 for 2970 fps

235 grain Barnes TSX with 76.5 grains of H4895 for 3023 fps


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12764 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
Picture of chuck375
posted Hide Post
I think they should work, I killed a whole lot of deer and a few elk with a Speer 105g spitzer at 3000 fps out of my 243...

donttroll


Regards,

Chuck



"There's a saying in prize fighting, everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"
 
Posts: 4800 | Location: Colorado Springs | Registered: 01 January 2008Reply With Quote
One of Us
posted Hide Post
quote:
Reply

I shoot them at about 2500 fps with MOA accuracy. Know a guy who was involved in testing them who told me they were a true bonded bullet and good from 1700 fps on up. I've never recovered one from deer or hogs, all pass thrus but never noted any bullet fragments.
 
Posts: 367 | Location: South east Georgia | Registered: 16 September 2005Reply With Quote
One of Us
posted Hide Post
Thanks guys , I shot some yesterday, and they seemed to group @ 1.5 inch / 100 yards..plenty adequate for deer ... moderate recoil is a plus ..

Interesting to know that they are a bonded core bullet ..


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Bear Cat:
Thanks guys , I shot some yesterday, and they seemed to group @ 1.5 inch / 100 yards..plenty adequate for deer ... moderate recoil is a plus.


Yep, you got yourself some good little plinker loads right there.

I use the 200gn pills for that, but they'll still put a deer down. Hogs too.


All The Best ...
 
Posts: 813 | Location: Texas | Registered: 15 October 2015Reply With Quote
One of Us
Picture of A7Dave
posted Hide Post
They wouldn't shoot for beans in my 375HH. Miserable groups. I'm guessing they were made for the 375Win.


Dave
 
Posts: 927 | Location: AKexpat | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by A7Dave:
They wouldn't shoot for beans in my 375HH. Miserable groups. I'm guessing they were made for the 375Win.



Wonder why - same diameter bullet .375
375 win was designed around 235gr. - 35gr./IMR 3031 - 1700 fps

My manual shows my load @ 2700 fps , I don't think I would try to push them any faster. I have not chronograph them yet ...my max load shows 75grains IMR 3031 - 2900 fps


DRSS Chapuis 9.3 x 74 R
RSM. 416 Rigby
RSM 375 H&H
 
Posts: 1303 | Location: Catskill Mountains N.Y. | Registered: 13 September 2011Reply With Quote
One of Us
Picture of umzingele
posted Hide Post
I have a rifle made by Holland in 1961. 300 grain Nosler partitions, 286 grain PMP solids, Hornady 300 grain solids, 270 grain Hornady softs all group 1 inch or less....the 235 grain Speers, of which I bought 400 because they were cheap.....group minute of paper plate....nothing better than a five inch group....more like patterning my shotgun...fast or slow my rifle and the 235 grain Speers are not compatible!
 
Posts: 266 | Location: Johannesburg, South Africa | Registered: 20 October 2011Reply With Quote
One of Us
Picture of A7Dave
posted Hide Post
quote:
Originally posted by umzingele:
I have a rifle made by Holland in 1961. 300 grain Nosler partitions, 286 grain PMP solids, Hornady 300 grain solids, 270 grain Hornady softs all group 1 inch or less....the 235 grain Speers, of which I bought 400 because they were cheap.....group minute of paper plate....nothing better than a five inch group....more like patterning my shotgun...fast or slow my rifle and the 235 grain Speers are not compatible!


That was my experience. I got a box of them (the 235's) when I bought my rifle. I figured I'd use them to sight in my scope and for practice, but the accuracy was, like you say, minute of paper plate. I tossed them out. If they work for other's guns, wonderful. I was surprised how bad they were in mine.


Dave
 
Posts: 927 | Location: AKexpat | Registered: 27 October 2008Reply With Quote
One of Us
Picture of chuck375
posted Hide Post
I guess I'm lazy. I shoot 150g Partitions out my 270 Win at 3000 fps, 300g A-Frames at 2550 out of our 375 H&H/Weatherby and 570 TSX's at 2300 fps out of my 500 Jeffery. With the exception of a varmint load using 90g Sierra HPBTs out of our 270, one bullet one load per caliber. Seems to work.


Regards,

Chuck



"There's a saying in prize fighting, everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"
 
Posts: 4800 | Location: Colorado Springs | Registered: 01 January 2008Reply With Quote
one of us
posted Hide Post
My only advise based on my limited experience with the old 235s is they sure kill game well, but keep your shots in the rib cage and off bone or they will getcha a tub of blood shot goooooo! or shoot them at about 2100 FPS (Im guessing on the velocity but close Id bet) and they will kill deer well and not destroy all that good eating.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
Chuck is spot on, Ive shot a lot of small PG with 300 and 350 gr. Woodleighs, also a lot of big PG and CApe buffalo, Hippo and Eland..If it fails to expand game won't go far..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
I've used a 235gr Speer for years on local game. My load only makes just over 2800fps and the bullet holds together well at that speed. You can push them harder but I hardly see the point. It's not a bullet I'd use on large thick skinned game but for medium sized thin skinned game it works just fine.

When the Brits originally developed the 375H&H they had 235, 270 and 300gr factory loads for it. The 235gr loads were designed for lighter game at longer ranges but were subsequently dropped.
 
Posts: 504 | Location: Melbourne, Australia | Registered: 19 June 2006Reply With Quote
one of us
posted Hide Post
A lot of folks expect all game to flop at the shot with big bores when in reality they may as often as not run 50 or 100 yards with a shoulder shot..Ive shot a lot of PG with the 375, 416, 404 and even the 470, and had even the smallest of PG make a run..The plus is you usually don't have a lot of blood shot meat, and you will have a good blood trail and I doubt that you will never lose one, I never have..

If you want knock,em down every time and a bloodshot mess use a 22-250, or 220 swift. and expect an ocassional animal lost..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by A7Dave:
quote:
Originally posted by umzingele:
I have a rifle made by Holland in 1961. 300 grain Nosler partitions, 286 grain PMP solids, Hornady 300 grain solids, 270 grain Hornady softs all group 1 inch or less....the 235 grain Speers, of which I bought 400 because they were cheap.....group minute of paper plate....nothing better than a five inch group....more like patterning my shotgun...fast or slow my rifle and the 235 grain Speers are not compatible!


That was my experience. I got a box of them (the 235's) when I bought my rifle. I figured I'd use them to sight in my scope and for practice, but the accuracy was, like you say, minute of paper plate. I tossed them out. If they work for other's guns, wonderful. I was surprised how bad they were in mine.


Try loading the 235-grainers into the 2700-fps range with Varget.


All The Best ...
 
Posts: 813 | Location: Texas | Registered: 15 October 2015Reply With Quote
One of Us
posted Hide Post
Bear Cat,
Please keep us posted on your results this year.

I use to hunt deer with a 375H&H and had great fun and success with it: Pre-64 mod 70.


NRA Benefactor Member
 
Posts: 39 | Registered: 11 February 2007Reply With Quote
one of us
posted Hide Post
Some guns are going to shoot them and some will not and that usually applies to any bullet. We make educated guesses on this stuff but it no more than guess and by gosh..

I have an old Savage 250-3000 mod 99 takedown with a fwt barrel and a 1x14 twist that shoots Hornady 117 gr. RN into one hole for 5 shots, same with a 60 gr. varmint bullet and everything in between, except Nosler 100 gr. Bal tips that keyhole!!..Its and odd duck for sure, and a good'un!.

All one can do is forget advise and head to the range for testing, A world of surprised await you there, good and bad.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
The 235 Speers were available long before the .375 WCF was even thought of. Yes, Elmer called them “woodchuck bullets” but then he didn’t think that the .30-06 was adequate for deer either.

Before there were many jacket bullets in .375”-378” readily available I used the Speer 235s in my .38-55 Win94 rebored by Ackley. Launched at 1850 fps they didn’t seem to expand much on Kodiak blacktails but killed okay. Once the .375 WCF was introduced and the 200-220 grain jacketed bullets were available I used the Hornady 220FN with better performance.

.
 
Posts: 677 | Location: Arizona USA | Registered: 22 January 2006Reply With Quote
one of us
Picture of tarbe
posted Hide Post
I've killed deer and hogs with the 235gr Speer over 65gr IMR 4895.

Runs just under 2,500 fps. Kills well without the awful mess of the high-velocity loads.


0351 USMC
 
Posts: 1536 | Location: Romance, Missouri | Registered: 04 March 2002Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia