The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores 404 Jeffery Factory Crimp Die SourceGo | New | Find | Notify | Tools | Reply | |
One of Us |
Does anyone know where to get a Lee Precision or similar factory crimp die for the 404 Jeffery? NOT a taper die. I just called Lee and they don't have any. They can do it custom, but they just closed their custom service down because they were flooded with requests. "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | ||
|
| one of us |
Lee Precision will make you one. | |||
|
| One of Us |
Unfortunately not for a few months. Their custom shop is closed and severely back logged. "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
One of Us |
You cannot just set up your seating die to crimp (as a separate step at the end) as an interim solution? Mike | |||
|
| One of Us |
The taper die works fine on the 430 gr NF solids, but there is nothing for the crimp to set into on the 380 gr SS bullets when seating at max spec length. "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
| One of Us |
I guess I'll go with a backup plan for some Aframes. I'm sure I can taper crimp them. "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
One of Us |
There are gadgets available that will put a cannelure on bullets allowing them to then be crimped as part of the bullet seating process, or as a separate step with the same die, as you wish. | |||
|
| One of Us |
Austin Hunter, I think that with some slight modification of the collet a Lee Factory Crimp Die for the 416 Rem. Magnum will work. Lefteris | |||
|
One of Us |
I have a LEE factory crimp die for a 404 Jeffery. (I have to find where I hid it). You are welcome to use it. Only caveat is that it is a large 1 1/4-12 Thread die. If you have a Lee Classic die with a removable insert it will work on that press. Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
| One of Us |
I would order the die if they'll take the order. If it's custom you will need to send a dummy round with the bullet you will be using and where you wanted seated. As to the wait, whenever I've dealt with them they've Always seemed overwhelmed but I got delivery way before the stated date. The 404 is not a particularly vigorous round so you should be Ok for practice. Depending on when your hunt is, it will be the waiting game we all hate. | |||
|
| One of Us |
Thanks guys. I do plan to order one when they will accept the order. Rusty - I'll send you a PM. "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores 404 Jeffery Factory Crimp Die Source
Visit our on-line store for AR Memorabilia