One of Us
| |
| | | Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002 | 
IP
|
|
one of us
| Ahh, I forgot to check them. Is Jamison's brass decent? |
| | | Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002 |
IP
|
|
one of us
| I have had Horneber brass on backorder for six months now |
| | | Posts: 363 | Location: Paris, France | Registered: 20 March 2001 |
IP
|
|
one of us
| I use horneber. Some of my cases have been loaded 8 times and going strong. I have had to trim them a very small amount to true the case mouth. I crimp my loads and I think it stresses the mouth of the case much more than the case body/neck.
square shooter
|
| | | Posts: 2608 | Location: Moore, Oklahoma, USA | Registered: 28 December 2003 |
IP
|
|
One of Us
| quote: Originally posted by Urodoji:
Ahh, I forgot to check them. Is Jamison's brass decent?
I thought I had some defective Jamison brass, but instead it turned out to be a defective RCBS sizing die and the brass was fine. |
| | | Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002 |
IP
|
|
One of Us
| Judge,
tell me where the location of that shot is, and how I can get a small cabin built there.
Rich |
| | |
