The Accurate Reloading Forums
.500 Jeff Brass

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/869100045

17 September 2006, 11:38
Urodoji
.500 Jeff Brass
I find myself suddenly needing some .500 Jeff brass, but all I can find is Bertram brass at 98 bucks a box. Does anyone else make brass for this beast?
17 September 2006, 13:05
500grains
Both Horneber and Jamison make it. Contact www.huntingtons.com which stocks for them.
17 September 2006, 13:37
Urodoji
Ahh, I forgot to check them. Is Jamison's brass decent?
17 September 2006, 15:07
bobby van der Putten
I have had Horneber brass on backorder for six months now
17 September 2006, 18:45
lb404
I use horneber. Some of my cases have been loaded 8 times and going strong. I have had to trim them a very small amount to true the case mouth. I crimp my loads and I think it stresses the mouth of the case much more than the case body/neck.


square shooter
17 September 2006, 18:50
500grains
quote:
Originally posted by Urodoji:
Ahh, I forgot to check them. Is Jamison's brass decent?


I thought I had some defective Jamison brass, but instead it turned out to be a defective RCBS sizing die and the brass was fine.
18 September 2006, 08:29
Idaho Sharpshooter
Judge,

tell me where the location of that shot is, and how I can get a small cabin built there.

Rich