THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Talley quickrelease scope mounts

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Talley quickrelease scope mounts Login/Join
 
one of us
Picture of TOP_PREDATOR
posted
Would you ues Talley quickrelease scope mounts on a DG rifle??? are Talleys mounts up to the job??

Rifle is a Sako 375

Thanks James


"Never in the field of human conflict
was so much owed by so many to so few." Sir Winston Churchill

 
Posts: 1881 | Location: Throughout the British Empire | Registered: 08 October 2004Reply With Quote
Moderator
posted Hide Post
Yes, and yes.

I have them on my .300Wby. and 7mmSTW, both of which have a sharper recoil impulse than a Sako .375.

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
One of Us
Picture of Badger Matt
posted Hide Post
I've got them on my .416 Rigby.
 
Posts: 1266 | Location: Simpsonville, SC | Registered: 25 June 2006Reply With Quote
One of Us
posted Hide Post
James,
If you get a pair of Talley QR mounts let me know how you get on with them I might buy a pair myself. wave
 
Posts: 1374 | Location: New Zealand | Registered: 10 February 2005Reply With Quote
One of Us
posted Hide Post
I have three sets of Talleys and would not use anything else. I have them on a 350 Remington, a 375 H&H, and a 458 Lott. They are an excellent product. My only beef with Talley is that they don't make a 30mm ring for a CZ.
 
Posts: 551 | Location: Woodbine, Ga | Registered: 04 December 2003Reply With Quote
One of Us
posted Hide Post
I've used the talley's over the years on 375's, 416's, and 450's very perform flawlessly.


"An individual with experience is never at the mercies of an individual with an argument"
 
Posts: 1827 | Location: Palmer AK & Prescott Valley AZ | Registered: 01 February 2005Reply With Quote
one of us
posted Hide Post
I have them on:

300 WSM
330 Dakota
375 H&H
416 Rigby

Work well on all the above.
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
One of Us
posted Hide Post
I have them on my .416 rem and .375 H&H. I probably put 350 rounds through my 416 this last spring/summer and had no problems. Several trips to the range during this time confirmed that the zero stayed consistant.

Doug
 
Posts: 280 | Location: Ft. Worth, TX | Registered: 20 April 2005Reply With Quote
one of us
posted Hide Post
The world will fail befor Talley mounts will. There are others that may be as good but I have yet to see a trim elegant ring assembly that is tougher. The only thing I want Gary to do is to find a different way to make the QD levers align. Call me lazy but I think there is a far simpler way.


square shooter
 
Posts: 2608 | Location: Moore, Oklahoma, USA | Registered: 28 December 2003Reply With Quote
one of us
posted Hide Post
Will I be able to see my iron sights on my Ruger Rsm with the Tally base ?
 
Posts: 68 | Location: Michigan | Registered: 02 January 2004Reply With Quote
One of Us
posted Hide Post
these are for folks who won't pay for a good set of claw mounts.

i can pull my claw mounted scope off and put it back on before you can get your little levers ready to dismount the scope.

they are cute, but not for serious dg rifles where you may have to have the scope off in an instant !


TOMO577
DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 1144 | Location: west of erie, pa | Registered: 15 September 2006Reply With Quote
one of us
Picture of Fjold
posted Hide Post
quote:
Originally posted by tomo577:
these are for folks who won't pay for a good set of claw mounts.

i can pull my claw mounted scope off and put it back on before you can get your little levers ready to dismount the scope.

they are cute, but not for serious dg rifles where you may have to have the scope off in an instant !



Roll Eyes


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12879 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Talley quickrelease scope mounts

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia