Talley quickrelease scope mounts

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/857107255

13 October 2006, 01:17

TOP_PREDATOR

Talley quickrelease scope mounts

Would you ues Talley quickrelease scope mounts on a DG rifle??? are Talleys mounts up to the job??

Rifle is a Sako 375

Thanks James

"Never in the field of human conflict
was so much owed by so many to so few." Sir Winston Churchill

13 October 2006, 03:06

GeorgeS

Yes, and yes.

I have them on my .300Wby. and 7mmSTW, both of which have a sharper recoil impulse than a Sako .375.

George

13 October 2006, 03:20

Badger Matt

I've got them on my .416 Rigby.

13 October 2006, 03:30

oldun

James,
If you get a pair of Talley QR mounts let me know how you get on with them I might buy a pair myself.

13 October 2006, 04:27

1115

I have three sets of Talleys and would not use anything else. I have them on a 350 Remington, a 375 H&H, and a 458 Lott. They are an excellent product. My only beef with Talley is that they don't make a 30mm ring for a CZ.

13 October 2006, 04:32

dirklawyer

I've used the talley's over the years on 375's, 416's, and 450's very perform flawlessly.

"An individual with experience is never at the mercies of an individual with an argument"

13 October 2006, 20:18

MHC_TX

I have them on:

300 WSM
330 Dakota
375 H&H
416 Rigby

Work well on all the above.

13 October 2006, 22:56

dougaboy

I have them on my .416 rem and .375 H&H. I probably put 350 rounds through my 416 this last spring/summer and had no problems. Several trips to the range during this time confirmed that the zero stayed consistant.

Doug

13 October 2006, 23:25

lb404

The world will fail befor Talley mounts will. There are others that may be as good but I have yet to see a trim elegant ring assembly that is tougher. The only thing I want Gary to do is to find a different way to make the QD levers align. Call me lazy but I think there is a far simpler way.

17 October 2006, 03:11

Kazoo

Will I be able to see my iron sights on my Ruger Rsm with the Tally base ?

17 October 2006, 07:28

tomo577

these are for folks who won't pay for a good set of claw mounts.

i can pull my claw mounted scope off and put it back on before you can get your little levers ready to dismount the scope.

they are cute, but not for serious dg rifles where you may have to have the scope off in an instant !

17 October 2006, 07:34

Fjold

quote:
Originally posted by tomo577:
these are for folks who won't pay for a good set of claw mounts.

i can pull my claw mounted scope off and put it back on before you can get your little levers ready to dismount the scope.

they are cute, but not for serious dg rifles where you may have to have the scope off in an instant !

Frank

"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite