The Accurate Reloading Forums
I almost ralphed my breakfast.
18 October 2007, 23:14
JudgeGI almost ralphed my breakfast.
This is on a "custom" pre-64 Model 70 .375 H&H magnum. Gag!
JudgeG ... just counting time 'til I am again finding balm in Gilead chilled out somewhere in the Selous.
18 October 2007, 23:18
MacifejLooks like your floor plate has been exposed to flesh eating bacteria.
18 October 2007, 23:44
MJinesMust be from that Learn Engraving at Home in Your Spare Time With a Dremel Tool video.
Mike
18 October 2007, 23:52
WhitworthHow old is the "artist"? Or rather, what grade is the engraver in?
"Ignorance you can correct, you can't fix stupid." JWP
If stupidity hurt, a lot of people would be walking around screaming.
Semper Fidelis
"Building Carpal Tunnel one round at a time"
19 October 2007, 00:06
jorgeWell, now we know what shootaway does for a living....jorge
USN (ret)
DRSS Verney-Carron 450NE
Cogswell & Harrison 375 Fl NE
Sabatti Big Five 375 FL Magnum NE
DSC Life Member
NRA Life Member
19 October 2007, 00:12
WinkI never realized that Rocky Squirrel was engraving Bullwinkle on rifles. That's quite a find.
_________________________________
AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
19 October 2007, 00:23
butchlocthat is a rare bullwinkle in love picture
19 October 2007, 00:40
boom stick
I sure hope they repeal the engraving merrit badge before more good rifles get botched.
19 October 2007, 00:43
MJinesquote:
Originally posted by jorge:
Well, now we know what shootaway does for a living....jorge
Thanks alot Jorge, I just blew Coke out my nose all over the computer keyboard.
Mike
19 October 2007, 00:47
Buglemintoday
LoL
"Let me start off with two words: Made in America"
19 October 2007, 00:47
Aspen Hill Adventures
Yikes! That is aweful.
~Ann
19 October 2007, 01:50
Idaho Sharpshooteris that thing smirking at us? Bullwinkle's girlfriend on a bad hair day.
Rich
DRSS
Knowledge not shared is knowledge lost...
19 October 2007, 04:38
577NitroExpressJudge, you kill me. Mikey, you are a close second.
My three year old can scribble better than that.
577NitroExpress
Double Rifle Shooters Society
Francotte .470 Nitro Express
If stupidity hurt, a lot of people would be walking around screaming... 19 October 2007, 04:39
jorgequote:
Originally posted by MJines:
quote:
Originally posted by jorge:
Well, now we know what shootaway does for a living....jorge
Thanks alot Jorge, I just blew Coke out my nose all over the computer keyboard.
sorry....
jorge
USN (ret)
DRSS Verney-Carron 450NE
Cogswell & Harrison 375 Fl NE
Sabatti Big Five 375 FL Magnum NE
DSC Life Member
NRA Life Member
19 October 2007, 10:27
JKSThat is so comical it HAS to be a joke????
If "real" the engraver needs a beat down
John
There are those that do, those that dream, and those that only read about it and then post their "expertise" on AR!
19 October 2007, 17:45
hikerbumquote:
THE ACCURATERELOADING.COM FORUMS
The good part is, you can alwasy buy a replacement and get rid of that........
Si Vis Pacem, Para Bellum
19 October 2007, 19:20
J Stamboughwell, that soured the taste of my bourbon. thanks!
james
19 October 2007, 20:09
buckeyeshooterLooks like somebodies 8 year old did the engraving job.
20 October 2007, 05:39
Gringo CazadorI like the upside down boobs at the bottom
Billy,
High in the shoulder
(we band of bubbas)
20 October 2007, 06:39
tiggertateI think those are nuts, Billy.
"Experience" is the only class you take where the exam comes before the lesson.
20 October 2007, 07:35
Tyler KempStellar rack on it.
Love shooting precision and long range. Big bores too!
Recent college grad, started a company called MK Machining where I'm developing a bullpup rifle chassis system.
20 October 2007, 08:53
BaxterBThat is one depressed looking Moose, of course if I were drawn that poorly, I'd be a little depressed too, or maybe I'd wish to be shot with the rifle I was so poorly drawn on.
20 October 2007, 08:57
boom stickquote:
Originally posted by BaxterB:
That is one depressed looking Moose, of course if I were drawn that poorly, I'd be a little depressed too, or maybe I'd wish to be shot with the rifle I was so poorly drawn on.
20 October 2007, 09:08
RIPquote:
Originally posted by tiggertate:
I think those are nuts, Billy.
Rocky the Flying Squirrel's nuts no doubt.
Why do they always do these things to Pre-64 M70's in .375 H&H?
20 October 2007, 09:16
MacifejSame reason Bubbas be jackin' up old Mauser Actions! Cause Leroy, Elroy, and Jethro down at the Sow & Cow on route 3 told em that's the sheeet to have!
20 October 2007, 19:05
El DeguelloHopefully, that "decoration" is confined to the floorplate.........
"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
20 October 2007, 19:24
fla3006The good part is it doesn't look too deep, could be filed and polished out, reblued.
NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
20 October 2007, 23:14
Jim ManionJudge G - What did you pay for it?
SCI Life Member
DSC Life Member
20 October 2007, 23:38
Dr Bquote:
I almost ralphed my breakfast.
Judge That would be a waste of good Wiskey!!
21 October 2007, 00:17
The MetalsmithLook closer, think it's one of them rare inbred 4-eared sheep.
"Molotov Cocktails don't leave fingerprints"
-Dr. Ski
21 October 2007, 00:26
boom stickmetalsmith...what case will you use for the 800 NE the 20x102 anti tank???
20 MM with some bmg's a golf ball and a stick of ram.
21 October 2007, 23:15
The MetalsmithThe 800NE and the other projects I had are a no go anymore as far as myself working on them. My brother is actually going to take the blueprints and create the prototypes under my guidance as well. My health has been failing rapidly from a late diagnosis of PKD and under the surgeries and treatments I'm about to undergo, I doubt I'll have the time nor the energy to create my own projects. Which ain't gonna stop me from thinking up new designs and coming up with the blueprints and concepts, just have to rely on other people to actually make it come true. I'll keep you updated on what's going on.
"Molotov Cocktails don't leave fingerprints"
-Dr. Ski
22 October 2007, 09:05
surestrikeThat's kinda purtty.
23 October 2007, 05:19
Moose-HunterThat looks like dog shit.
23 October 2007, 05:24
RIPWell, Moose-Hunter should know, it does not look like a moose. More like Mickey Mouse than dog doodoo IMHO.
23 October 2007, 11:35
gumboot458.......Jorge ,, you definatly made my day with that one...I,m glad I wasn,t drinking a coke or anything else for that matter.....Thanks...That floor plate needs an angle grinder taken to it...
.If it can,t be grown , its gotta be mined ....
23 October 2007, 14:33
boom stickquote:
Originally posted by The Metalsmith:
The 800NE and the other projects I had are a no go anymore as far as myself working on them. My brother is actually going to take the blueprints and create the prototypes under my guidance as well. My health has been failing rapidly from a late diagnosis of PKD and under the surgeries and treatments I'm about to undergo, I doubt I'll have the time nor the energy to create my own projects. Which ain't gonna stop me from thinking up new designs and coming up with the blueprints and concepts, just have to rely on other people to actually make it come true. I'll keep you updated on what's going on.
Why dont you start a thread in the big bores board for a potential collaberation? Good luck with yer health and the 800
God does not take away time spent hunting, shooting or wildcatting
I think this could be neet
24 October 2007, 03:20
thornellThat has got to be among the worst I have seen.
25 October 2007, 03:45
drunkintoasterwow a shiver just went through my very soul
still can't make up my mind on what firearm I will buy next
25 October 2007, 04:17
470 MbogoSurestrike
From your other post it sounds like you should buy it and put it on that gun you bought off of Ray. It looks like the finishing touch it needs.
Take good care,
Dave