The Accurate Reloading Forums
404

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/7471026941

07 February 2011, 03:54
captdavid
404
How easy/safe is it to fit a 404 0n a etandard Mauser action? capt david


"It's not how hard you hit 'em, it's where you hit 'em." The 30-06 will, with the right bullet, successfully take any game animal in North America up to 300yds. Get closer!
07 February 2011, 03:55
jeffeosso
As hard has making a 358 norma. The 10,75x68 is far easier


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
07 February 2011, 05:45
VFR1
Use one of Duane's bottom metal designed for the .404 and have a Mauser guy build it. Mine is on a '09 and feeds just as good as my 10.75x68.
07 February 2011, 06:00
ramrod340
quote:
As hard has making a 358 norma.

You lost me on that one. Confused A 358Norma is easy a 338Norma sucks.


As usual just my $.02
Paul K
07 February 2011, 08:17
congomike
I had a Mark X that was originally a 375, rebarreled to 300 H&H. I put 3 Kynoch 404 rounds in the magazine and it fed them as slick as it did the 300 H&H. At the time, it was the stock magazine box and no work done to the rails after it left the factory. The extractor grabbed the shells and ejected them very easily.
And before you ask, the firing pin was removed from the bolt before I tried this. This may have been an exception, but after that experience, I think it could be done quite easily.
07 February 2011, 12:22
Von Gruff
I built mine on a 50's FN ex mil and feed and fire is 100% reliable.

Von Gruff.


Von Gruff.

http://www.vongruffknives.com/

Gen 12: 1-3

Exodus 20:1-17

Acts 4:10-12