THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    "Will not feed from the left side:--How to Correct?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
"Will not feed from the left side:--How to Correct? Login/Join
 
One of Us
posted
I have read a number of posts referencing instances of failure to feed from the left side. Most recently this was noted in the 500 MDM discussion about a CZ-550 458 Lott that would not chamber a certain bullet from the left side of the magazine. I note, also, in a 416 Rigby and a 375 Ultramag I own that cartridges feeding from the left side require a little massaging. They do feed but they require a bit of coaxing. These things noted, how are these problems corrected, if at all. Thanks,
 
Posts: 97 | Location: Houston, TX USA | Registered: 17 April 2002Reply With Quote
One of Us
posted Hide Post
where is the problem ?

What is happening to the round that requires "coaxing" for it to chamber. is it hitting the top of the chamber before falling back and allowing it to be chambered ?
(Same as used to happen on Win mod 70 458 WM)

Is it the round on the left sits differently than the one's
on the right and so is picked up differently ?

Is the feed ramp different, even by a very small margin ?


Feed ramps are often an issue.
 
Posts: 3191 | Location: Victoria, Australia | Registered: 01 March 2007Reply With Quote
one of us
Picture of Will
posted Hide Post
Of course I dinked with mine but always lucked out before going beyond the point of no return.

Sometimes the rail cutout needs to be cut a bit further back to let the shell pop out quicker, and sometimes the feed ramp needs to be ground down because it won't let the bullet feed in without bumping it up, and sometimes the spring is too soft or hard, and sometimes the follower is screwed up.

Unless someone has really screwed it up, it's fixable. Just depends on whether you want to chance it or send it off to someone that probably knows.

Good luck whatever you decide.


-------------------------------
Will Stewart / Once you've been amongst them, there is no such thing as too much gun.
---------------------------------------
and, God Bless John Wayne.

NRA Benefactor Member, GOA, N.A.G.R.
_________________________

"Elephant and Elephant Guns" $99 shipped
“Hunting Africa's Dangerous Game" $20 shipped.

red.dirt.elephant@gmail.com
_________________________

Hoping to wind up where elephant hunters go.
 
Posts: 19380 | Location: Ocala Flats | Registered: 22 May 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
if you aren't a gunsmith, do NOT remove any metal from your gun.

best way to fix it to wrap 10-15 $10 bills around the barrel and send to a gunsmith that specializes in making them feed.


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of michael458
posted Hide Post
quote:
Originally posted by jeffeosso:
if you aren't a gunsmith, do NOT remove any metal from your gun.

best way to fix it to wrap 10-15 $10 bills around the barrel and send to a gunsmith that specializes in making them feed.



Jeffe is 100% CORRECT!!!!! This is a very very delicate matter, which one can go too far before you have a clue you have done so. This is a pretty specialized issue. Of course Brian at SSK is my expert at this, so I leave it to him. Not just anyone can do this either, don't trust joe blow gunsmith at the local shop!
Michael


http://www.b-mriflesandcartridges.com/default.html

The New Word is "Non-Conventional", add "Conventional" to the Endangered Species List!
Live Outside The Box of "Conventional Wisdom"

I do Not Own Any Part of Any Bullet Company, I am not in the Employ Of Any Bullet Company. I do not represent, own stock, nor do I receive any proceeds, or monies from ANY BULLET COMPANY. I am not in the bullet business, and have no Bullets to sell to you, nor anyone else.
 
Posts: 8426 | Location: South Carolina | Registered: 23 June 2008Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Call Tip Burns, Canyon Lake, Texas

If he can make my 404 Jeffery feed he can help your rifle.


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    "Will not feed from the left side:--How to Correct?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia