THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
.416 Hoffman Login/Join
 
one of us
Picture of bwanamrm
posted
For loaded ammo, everyone who shoots this cartridge and are not rolling their own, Superior or Safari Arms? Or is there someone else I am not aware of?


On the plains of hesitation lie the bleached bones of ten thousand, who on the dawn of victory lay down their weary heads resting, and there resting, died.

If you can talk with crowds and keep your virtue,
Or walk with Kings - nor lose the common touch...
Yours is the Earth and everything that's in it,
And - which is more - you'll be a Man, my son!
- Rudyard Kipling

Life grows grim without senseless indulgence.
 
Posts: 7568 | Location: Victoria, Texas | Registered: 30 March 2003Reply With Quote
One of Us
Picture of 470Evans
posted Hide Post
You can also shoot 416 Rem factory loads in a Hoffman chamber but not Hoffman loads in a Rem chamber.
 
Posts: 1311 | Location: Texas | Registered: 29 August 2006Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Shoot 416 rem.


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40106 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of 505ED
posted Hide Post
Postdriver on the board shoots one, dont know what he uses, but don't think he rolls his own. Might check with him.
I've had good luck with Superior.

Ed


DRSS Member
 
Posts: 2289 | Location: Texas | Registered: 02 July 2005Reply With Quote
one of us
Picture of bwanamrm
posted Hide Post
Thanks guys... never owned one but I am about to. Not being familiar with the cartridge, I was pleased to know about the ability to shoot regular Remington ammo in the Hoffman. As I remember, the Remington is the 8MM Rem Mag necked up where the Hoffman's parent case is the .375H&H so it makes sense.

I take it accuracy should be acceptable with the right Remmy load?


On the plains of hesitation lie the bleached bones of ten thousand, who on the dawn of victory lay down their weary heads resting, and there resting, died.

If you can talk with crowds and keep your virtue,
Or walk with Kings - nor lose the common touch...
Yours is the Earth and everything that's in it,
And - which is more - you'll be a Man, my son!
- Rudyard Kipling

Life grows grim without senseless indulgence.
 
Posts: 7568 | Location: Victoria, Texas | Registered: 30 March 2003Reply With Quote
One of Us
posted Hide Post
Probably Quality and Conley (CPC) as well.
 
Posts: 20175 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
the only difference is a slight decrease in shoulder angle on the rem. accuracy should be unaffected. George knocked this out of the park


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40106 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia