THE ACCURATERELOADING.COM BIG BORE FORUMS

Page 1 2 3 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Searcy Double Rifles Login/Join
 
one of us
posted Hide Post
quote:
Originally posted by RJM:
From my friend with the rifle...


Bob,

I read the thread. The load you fired was 112gr. of Reloader 15. The loads I
fired was 115gr. @ 1800-1835fps. I will be going to 118gr next session. 700
NE statement of Butch regulating at 125gr. of Reloader 15 is not quite
accurate. I spoke with Butch and he told me the gun should regulate at
120-125gr. The FPS at 120gr should be around 2000fps. Like I said the posted
spec's on this load are 750gr bullet @ 2050fps. This was rarely achieved
with Kynoch factory ammo as it was a proofed round with 30"barrels. My
barrels are 24" so losing a 100 or so fps is pretty standard.

Bob


Did i read this wrong ? 700 grain .700 diameter bullet? Were are you getting the bullets from ? hope its ok to ask ?

Martin
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
One of Us
posted Hide Post
Martin,

I think you read it wrong. The bullet is a 750gn solid, Woodliegh. The powder charge is 115gns of Reloader 15

Maineguide
 
Posts: 75 | Location: Dover NH | Registered: 23 April 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Maineguide1:
Martin,

I think you read it wrong. The bullet is a 750gn solid, Woodliegh. The powder charge is 115gns of Reloader 15

Maineguide


And thats out of a 700 NE ?
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
one of us
Picture of Charles_Helm
posted Hide Post
quote:
Originally posted by MartinPotts:


And thats out of a 700 NE ?


I believe it was a .577 NE.
 
Posts: 8773 | Location: Republic of Texas | Registered: 24 April 2004Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Charles_Helm:
quote:
Originally posted by MartinPotts:


And thats out of a 700 NE ?


I believe it was a .577 NE.


Ahh .. I see .. was just wondering .. sounded like a darn small bullet for a .700
Although ? i am making Ed some 850's up in .700
diameter .. that may .. be a good weight..

Or even a pure lead no jacket gas checked one ?

Martin
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
  Powered by Social Strata Page 1 2 3  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia