THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
double gun case Login/Join
 
<Aaron Rust>
posted
I am wanting a double rifle case for my rifle. I want something for traveling but dedicated to this one rifle. Does anyone have knowledge of a double rifle case with a custom fitted interior. I don't care what the contruction materical is as long as it is strong. I have seen the German hunters at the airport with great looking cases. They were plastic but apeared very strong an nice.
 
Reply With Quote
one of us
posted Hide Post
Have you taken a look at what is called the "Lef-of-Mutton" leather cases made for double-barreled shotguns. They are shaped like a rifle blank with a divider down the middle...one side for the butt section and the other side for the barrels and forearm. A leather cap goes over the whole thing. I don't think I would ship one via air but they sure are handy for transporting in a car or truck...very, very classy.
 
Posts: 4360 | Location: Sunny Southern California | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
Americase can be purchased from Cabelas and it is steel construction and will take about anything you can dish out...They have others also...Lots of them around..

I have a leg of mutton, green cloth and leather but I ship the gun in it, in my Tuff Case.

------------------
Ray Atkinson

ray@atkinsonhunting.com
atkinsonhunting.com

 
Posts: 42401 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
<Bill Tompkins>
posted
Aaron Rust,

Try Cape Outfitters. They have a good selection of cases for double rifles or shotguns, some at very decent prices.

www.capeoutfitters.com

Bill

 
Reply With Quote
one of us
posted Hide Post
I don't know if these will be suitable for air travel, but I have one and can vouch for their quality and suitability to a fine double.


http://www.hueycases.com/

 
Posts: 306 | Location: Originally from Texas | Registered: 17 March 2001Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
Aaron-
Look at the Americase website www.americase.com . I had Americase build a custom case for a takedown bolt rifle and it turned out perfect. I sent them cutout tracings of my rifle pieces, scope and bolt; showed them the layout I wanted and they did the rest. It really is sweet. It's 22" long, 13" high and 3" deep. It has a black cordura cover and doesn't look much like a gun case except to you or me. Most gate agents have to be told that it is a gun case and needs to be checked. I will tell you it took two tries to get the fitting right, but it was quick and painless. About $400 including cover, nameplates, and embroidery.
 
Posts: 5053 | Location: Muletown | Registered: 07 September 2001Reply With Quote
one of us
Picture of 500nitro
posted Hide Post
Dec 2000 Gungames new products section listed some gun cases made by Addguard of TZ case Int Corp.
Steel & Aluminium of various sizes.
1-888-227-3393 or www.tz-case.com
 
Posts: 1069 | Location: Durban,KZN, South Africa | Registered: 16 January 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia