THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    .500" bullets for 50AE, Beuwulf, S&W, etc...

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
.500" bullets for 50AE, Beuwulf, S&W, etc... Login/Join
 
<BMG>
posted
I was at a different reloading shop than my 'regular' spot today because I needed some 350gr .416 Speer's for deer hunting in just over a week. Anyway, I saw some .500" 385gr bullets made by Remington. I asked if they would work in the 50AE and the guy said that they were designed for the 500 S&W. I figured if it's a .500" bullet why not. The bullet OAL is .937" and the cannalure is .375" up from the base of the bullet. I have a 50AE upper for my AR-15 and am planning on trying them in it. Can someone give me a MIN & MAX from quickload for H110, Unique, & BlueDot.

This heavier bullet might help the Beuwulf shooters.

Thanks,
BMG

ps. The guy also had 335gr Rainier .500" bullets for $15.50 per 100 (found them for $14.70 per 100 delivered on the net purchased in 500 bullet orders). For that price I think I found my plinker load ($8 savings over the Speer 325gr per 100). I was also unable to find any info on the Remington & 1 source/info for the Rainier bullets on the net. They must be new but I have them so I know they exist.

[ 10-31-2003, 02:51: Message edited by: BMG ]
 
Reply With Quote
<BMG>
posted
I hate to beg but I'm shooting this weekend and won't be able to get out again for a month or so after that. Anyone with Quickload?

Thanks,
BMG
 
Reply With Quote
one of us
posted Hide Post
BMG - no, but I have software. What is it that you would like to know? There has been load data posted on some of these cartridges before, you may want to search.
 
Posts: 2404 | Location: A Blue State | Registered: 28 September 2002Reply With Quote
one of us
Picture of Robgunbuilder
posted Hide Post
The best results with the .50 beowulf have been with Lil Gun powder. I found 37.5 grs with a 334 gr AA bullet works well at low pressure. Since the .50 AE has about .75% of the case capacity, I'd lower the charge by about 35%.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
one of us
posted Hide Post
BMG - reread you original post. I sounds as if you are planning on using a Remington .5", 385gr bullet in your 50AE. If this is what you are doing, and using the bullet dimensions you gave.

385 gr bullet
seated to cannelure, which yields a COL - 1.85"
Max average chamber pressure - 35,000 psi
23 gr of H110 powder should be about MAX !

I strongly recommend that you start out around 19gr of H110 and work up from there.
 
Posts: 2404 | Location: A Blue State | Registered: 28 September 2002Reply With Quote
one of us
posted Hide Post
i just bought a s&w 500 man i love that gun i shot it at the range at the store it packs one heck of a whallop.

if your looking for sheer power in a hand held factory available package the s&w 500 is it.
 
Posts: 2095 | Location: B.C | Registered: 31 January 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    .500&quot; bullets for 50AE, Beuwulf, S&amp;W, etc...

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia