THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Need to know cannelure to tip length of the average .585 projectiles.

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Need to know cannelure to tip length of the average .585 projectiles. Login/Join
 
viperidae
One of Us
posted
Thank you!
 
Posts: 528 | Location: Baltimore, MD | Registered: 21 July 2008Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
"most" big bores are at or about 0.700


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40082 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
TonyRumore
One of Us
posted Hide Post
Woodleigh .585" 750gr Weldcore RN SN is about .640"

Barnes .583" 750gr TSX FB is .860" from the tip to the center of the top groove. Most guys would probably seat these a bit deeper and end up with about .720" of bullet hanging out of the case.

Tony
 
Posts: 134 | Location: Inola, OK | Registered: 08 July 2011Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Need to know cannelure to tip length of the average .585 projectiles.

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia