The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores Question on the CZ 550 American Front SightGo | New | Find | Notify | Tools | Reply | |
| One of Us |
I'm looking at getting a 550 in 375 H&H, but the 25" barrel is longer than I'd like it to be. I'd like to have it cut back to about 23". Is the front sight welded onto the barrel so that it cannot be removed and reattached to the shorter barrel? | ||
|
Moderator |
Go ahead and have the barrel trimmed and crowned. If you want a better sight, use the necg UNIVERSAL front sight, have it soldered (not welded) on, if you like. Don't weld!! the universal (banded or ramp) allows for elevation adjustment jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
one of us |
BMR, I'm doing the same thing at this moment !! My gunsmith will cut the 25" barrel to 22" or 23", not sure yet how long I want it...  Mine is a Brno ZKK 602 in 375 H&H. L | |||
|
| one of us |
I just cut a CZ .416 back to 22" and installed the NECG sight already mentioned. It provides the elevation adjustments, and the windage is via drifting a peep I made from bar stock and fits into a dovetail I cut into the rear bridge. First I had to weld up the rear of the rear bridge so the sight would be far enough back to clear Talley rings. CZ's are good starting points for DG rifles. | |||
|
| one of us |
BTW-the new front sight has a screw holding it to the barrel, plus I soldered it for good measure. THis is an Alaskan bear guides back up rifle, so "belt and suspenders" mentality prevailed throughout The factory sight has a set screw under the blade, and I think it is also soldered. I know you can't drive them off, so they are either pressed on really well or soldered from the factory. But not welded | |||
|
one of us |
Ditto to all the above. I cut my Lott to 22" and put the NECG Univeral front sight on it. Apparently it is now standard procedure.  I think it was the medium height, but you had better screw it on without soldering first to make sure you have the right one....so you have the right height for that big rear sight (cut into a shallow V would be my recommendation). ------------------------------- Will Stewart / Once you've been amongst them, there is no such thing as too much gun. --------------------------------------- and, God Bless John Wayne. NRA Benefactor Member, GOA, N.A.G.R. _________________________ "Elephant and Elephant Guns" $99 shipped “Hunting Africa's Dangerous Game" $20 shipped. red.dirt.elephant@gmail.com _________________________ Hoping to wind up where elephant hunters go. | |||
|
| one of us |
....me prettey stupid...  I have been looking at Midways, adn there seems to be a LOT of diffrent front sights, all named NECG Unversal. Which one are you talking about? http://www.midwayusa.com/ebrowse.exe/browse | |||
|
| one of us |
don't know about Midway. I just order all this stuff from Brownells. The medium sight I have is Brownells part #: 661-000-006 You can search their site to find this and other heights. It is a crap shoot as to what height is needed. I ocassionally have to buy more than one height. It is the way it goes. I am not as chicken poop as some and try to get the supplier to accept used returns. ------------------------------- Will Stewart / Once you've been amongst them, there is no such thing as too much gun. --------------------------------------- and, God Bless John Wayne. NRA Benefactor Member, GOA, N.A.G.R. _________________________ "Elephant and Elephant Guns" $99 shipped “Hunting Africa's Dangerous Game" $20 shipped. red.dirt.elephant@gmail.com _________________________ Hoping to wind up where elephant hunters go. | |||
|
| One of Us |
Thanks to all. Now I've got a good idea where to start. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores Question on the CZ 550 American Front Sight
Visit our on-line store for AR Memorabilia