<Elliot Viker> posted 14 December 2001 16:39
I just purchased my first 375, any advise on loads or other wise would be much appreacieated.
one of us Get the latest Nosler manual (should be out soon) and start with RL15 per the manual..probably the best powder for the H&H. If you don't like it the next best is Varget.
Posts: 4360 | Location: Sunny Southern California | Registered: 22 May 2002
IP
one of us 73 gr RL-15 behind a 260 gr nosler partition, remington brass and fed 215 primer, col 3.600" gives me 2740 fps and good accuracy out of my M70.
Moderator I agree with DB Bill as to trying RL-15 and Varget and also IMR-4320. One of these will satisfy you, especially with the 270 & 300 grainers.
<Daryl Elder> posted 15 December 2001 16:19
Varget is anice powder to work with and is supposed to be temperature stable. I've had good results in my 9.3x64
one of us And don't overlook that RL-19 behind the 300+ grain bullets.
~Holmes
Posts: 1171 | Location: Wyoming, USA | Registered: 03 June 2000
IP
one of us Posts: 42359 | Location: Twin Falls, Idaho | Registered: 04 June 2000
IP
