The Accurate Reloading Forums
375 h&h

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/27310727

14 December 2001, 16:39
<Elliot Viker>
375 h&h
I just purchased my first 375, any advise on loads or other wise would be much appreacieated.
14 December 2001, 20:43
DB Bill
Get the latest Nosler manual (should be out soon) and start with RL15 per the manual..probably the best powder for the H&H. If you don't like it the next best is Varget.
14 December 2001, 22:29
boltman
73 gr RL-15 behind a 260 gr nosler partition, remington brass and fed 215 primer, col 3.600" gives me 2740 fps and good accuracy out of my M70.
15 December 2001, 15:46
Nickudu
I agree with DB Bill as to trying RL-15 and Varget and also IMR-4320. One of these will satisfy you, especially with the 270 & 300 grainers.
15 December 2001, 16:19
<Daryl Elder>
Varget is anice powder to work with and is supposed to be temperature stable. I've had good results in my 9.3x64
15 December 2001, 18:42
Holmes
And don't overlook that RL-19 behind the 300+ grain bullets.

~Holmes

16 December 2001, 06:04
Atkinson
RL-15 is my powder of choice for the 375 H&H.

------------------
Ray Atkinson

ray@atkinsonhunting.com
atkinsonhunting.com