The Accurate Reloading Forums
Anybody have a .510 NE ?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/227102642

05 April 2005, 08:36
Hog Killer
Anybody have a .510 NE ?
I was wondering if anyone here has, or has shot the 510 NE? How do you like Mr. Echols creation? Is it picky to reload? Any quirks?

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
05 April 2005, 23:38
fla3006
I assume you're referring to the one he built on a Hagn action using the 50-140 Sharps case? As I recall, his reasoning for using the Sharps versus the 3" 500NE was availability of cases at the time. D'arcy posts on here from time to time, perhaps he can elaborate?


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
06 April 2005, 08:42
Grandpasez
I've shot my 510HE which is similiar, only little longer.Can get a lot of power at low pressures.Ed.


MZEE WA SIKU
06 April 2005, 23:42
Hog Killer
Ed,

How low of pressure are you getting, and how much longer case length? What velocity/bullet weight? Etc.

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
07 April 2005, 00:18
jeffeosso
quote:
Originally posted by Hog Killer:
Ed,

How low of pressure are you getting, and how much longer case length? What velocity/bullet weight? Etc.

Hog Killer


Keith,
be careful....

Ed designs and builds stuff that i am scared of even holding empty brass!!!

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
07 April 2005, 08:04
Grandpasez
The case is 3.57 in long, .578 base, .535
mouth, straight case made from 475 #2 brass.
Base is .013 bigger than 510NE. Slow ball
powder(H-870-AA8700-Wc-870) 90% fill, 2300 fps, 600 gr bullet soft jacket,long barrel, about 30-35k psi. Max load of W-760
at that case length, 2800+ fps.My only rimmed wildcat(IE with my name on it).Had couple cases stretched to 3.7(made chamber long. let brass stretch from firing) and got 3000 with 185 grs powder..Made cases semi-rimmed to test in
an Enfield bolt action(16 lbs). Will do one in future in a heavily weighted, heavy barrel
Ruger #1...Ed


MZEE WA SIKU
07 April 2005, 08:31
Hog Killer
Ed,

600gr/2800+fps. Where are you going to mount the hydralic/pneumatic recoil system on the Ruger #1. jump

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
07 April 2005, 10:08
Grandpasez
Keith--At 16 lbs it works great, real thick pad,
it is just a good shove.Just roll with it,
open action, brass falls in shirt pocket
if your real good,I'm not,
pop in round as your coming back down,
close action,fire second shot.All tongue in
cheek description.But seriously it goes back to design;Ruger #1 is great gun, you add weight,
and it becomes a pussycat just like
my Ruger 77. I will have long
7 lb barrel, 4 lbs extra in butt.My 16.5 lb
Ruger77 here, Tailgunner put it to his shoulder,
pointed out window, said 'That points nice'.
And he is only half my size. Muzzle energy
is tamed by engineering and I've stole the best ideas out there to do it.Ed.


MZEE WA SIKU
07 April 2005, 10:15
Hog Killer
Ed,

Well, I hope one day I will meet both you and some of your shoulder cannons. I am getteing to really like the big stuff. thumb

Hog Killer


IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club