THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Re: Question on .500 NE bullets and brass.

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Re: Question on .500 NE bullets and brass. Login/Join
 
one of us
posted
Woodleigh soft or solid, accept no substitute. This is particularly true if your rifle is a double.

ASS_CLOWN
 
Posts: 1673 | Location: MANY DIFFERENT PLACES | Registered: 14 May 2004Reply With Quote
one of us
posted Hide Post
I have used a .500NE on both buffalo and elephant. I use Woodleigh bullets and can say that they performed fairly well. I say fairly well because the solids have fishtailed on occaision and I routinely shoot through buffalo with the softs on broadside shots, even when bone is hit. This is a problem in herds. Three years ago I had to pay a small fine and fill out some papers when a through and through shot hit a cow buffalo. She had an ugly wound from the expanded slug and needed to be finished just as she was about to give us a go. Obviously I removed the aforementioned bullets from dead animals, so the bullets ultimately did their job. I stick with Woodleighs because they are made to original specs and are lead cored, therefore I don't have to be concerned about regulation or barrel separation or any of that other stuff. Just my 2 cents worth.

Geronimo
 
Posts: 816 | Location: Michigan | Registered: 14 April 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Re: Question on .500 NE bullets and brass.

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia