Go | New | Find | Notify | Tools | Reply |
One of Us |
Gents, Please click on the included link wher you can see the 20 photos of my new 700 AHR @ Photobucket completed in December 2012 by Wayne @ American Hunting Rifles... Respects, Phill http://s1341.beta.photobucket....SPRIME-PC/2012-12-10 | ||
|
One of Us |
Very nice!!! "though the will of the majority is in all cases to prevail, that will to be rightful must be reasonable; that the minority possess their equal rights, which equal law must protect, and to violate would be oppression." ---Thomas Jefferson | |||
|
One of Us |
Phill, Nice! How many does that hold. Wayne never told me about that option :-) | |||
|
One of Us |
Amazingly beautiful boheamoth you have there, Phil! Can't wait to read a range report. | |||
|
One of Us |
Biebs, 3 in the magazine. I actually asked Wayne about an extended magazine option by accident after he started, as I saw something similar on another AR member's rifle, though not a super bore. The GMA extended magazine is also installed on my 600 OK, and also holds 3 down. Respects, Phill | |||
|
One of Us |
Brandon, Thanks for the kind words...ditto to The Canadian... Respects, Phill | |||
|
one of us |
I like the looks of a drop magazine sometimes, somebody here has a 500 jeffery with one looks great. But you couldn't pay me to shoot this thing, how many pounds of recoil is it?! Red My rule of life prescribed as an absolutely sacred rite smoking cigars and also the drinking of alcohol before, after and if need be during all meals and in the intervals between them. -Winston Churchill | |||
|
One of Us |
Nice gun. And it came with a lifetime supply of ammo(5) WOODY Everyone is allowed an opinion, even if its wrong. | |||
|
One of Us |
Phill, That's one pretty thunderstick!! All the lines of a classic bolt-action rifle, love that short forend! What is the inside diameter of the NECG front signt on your rifle? I need one with a 1" I.D but they dont make them that large in the Masterpiece ramps, guess I'll have to just get one made. Please post your results at the range, a few videos would be welcome too! Cheers! Zubin One shot..meat! Two shots...maybe...Three shots...heap shit! - Old Indian adage | |||
|
One of Us |
As the other have said---very well done!!! I like everything on it. simple with just the right stuff where needed. Give us the full run down---weight, range report, loads--everything. Unless I missed something, I don't see a muzzle break | |||
|
One of Us |
It's WONDERFUL!!! | |||
|
one of us |
Can you actually get 4 AIMED shoots off in 15 second, with this cannon? Keith IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!! ------------------------------------ We Band of Bubbas & STC Hunting Club, The Whomper Club | |||
|
One of Us |
Dago Red, Depending on load, of course, but, if you go by the minimum load, approximately 160 ft lbs of recoil...and by minimum load I mean a 1000 gr slug @ 2150 fps...I know gents here have used 1000 gr slugs @ 2300 fps+, including Wayne during experimentation... Respects, Phill | |||
|
One of Us |
PoppaW, Respects, Phill | |||
|
One of Us |
z375, The inside diameter of the hood/sight is 5/8"...when I get to the range after Christmas and New Years are done, I would be happy to post some fun videos for everyone to laugh at! I'll bring MJOLNIR, my 600 OK sister rifle, and then you can have some deeper chuckles! Respects, Phill | |||
|
One of Us |
600 Overkill, Will do on the range report as mentioned earlier...initial loads are Wayne's "factory" rounds using 1000 gr copper alloy slugs @ 2200 fps, that is, until I make up my own after the holidays are done...weight of both my 700 AHR and 600 OK is 12.0 lbs even, empty...I do have a muzzle brake for both rifles, but, since most folks on AR have seen the now infamous AHR brake, I didn't include it in these photos... Respects, Phill | |||
|
One of Us |
Hog Killer, Don't know...have yet to try, but, will be fun...make some bucks and bet against me, though! Respects, Phill | |||
|
One of Us |
| |||
|
one of us |
I figured that was the reason for 3+1. Keith IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!! ------------------------------------ We Band of Bubbas & STC Hunting Club, The Whomper Club | |||
|
One of Us |
Phil, that's one fine looking rifle. I houpe you enjoy shooting it. Used to be bigdoggy700 with 929 posts . Originally registered as bigdoggy 700 in July 2006. | |||
|
One of Us |
Ken, Respects, Phill | |||
|
One of Us |
Phil, Apologies for not being clearer in my request, I meant the inside diameter of the band for the NECG front sight, not the hood i.d!! Do they make the Masterpiece Banded sight in a 1.00" internal dia. for the band? One shot..meat! Two shots...maybe...Three shots...heap shit! - Old Indian adage | |||
|
One of Us |
z, The largest diameter banded front sight that we have been able to find is about .945 i.d. sold by NECG. It is a special order part from Germany. We made the front sight on Phill's rifle from scratch as the i.d. is .990 or so. We designed it to use the NECG hood and sight inserts. The sling band is from scratch also. By scratch I mean NOT on a CNC, but by real machining on a lathe and a Bridgeport vertical mill, and a file, by the seat of our pants. | |||
|
One of Us |
How better can it be said than that? Respects, Phill | |||
|
One of Us |
Wow! Now THAT is the way to go, Wayne! Incredible work, love the way the rifle has come together, form and function melding effortlessly! One shot..meat! Two shots...maybe...Three shots...heap shit! - Old Indian adage | |||
|
new member |
Mmm necromancy.. It won’t let me PM him. Does anyone have pictures of this rifle still? I’m keen to see it. Cheers, Troy. | |||
|
One of Us |
I think I have some pics of some sort, somewhere. I believe the OP sold both of these rifles a few years ago and I don't know who owns them now. Naybe Matthew X. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia