The Accurate Reloading Forums
700 AHR Photos posted on Photobucket...
11 December 2012, 06:28
WHITE HUNTER BLACK HEART700 AHR Photos posted on Photobucket...
Gents,
Please click on the included link wher you can see the 20 photos of my new 700 AHR @ Photobucket completed in December 2012 by Wayne @ American Hunting Rifles...
Respects,
Phill
http://s1341.beta.photobucket....SPRIME-PC/2012-12-1011 December 2012, 07:04
thecanadianVery nice!!!
"though the will of the majority is in all cases to prevail, that will to be rightful must be reasonable; that the minority possess their equal rights, which equal law must protect, and to violate would be oppression."
---Thomas Jefferson
11 December 2012, 07:09
BiebsPhill, Nice! How many does that hold. Wayne never told me about that option :-)
11 December 2012, 07:18
Brandon.GleasonAmazingly beautiful boheamoth you have there, Phil! Can't wait to read a range report.
11 December 2012, 08:13
WHITE HUNTER BLACK HEARTBiebs,
3 in the magazine. I actually asked Wayne about an extended magazine option by accident after he started, as I saw something similar on another AR member's rifle, though not a super bore. The GMA extended magazine is also installed on my 600 OK, and also holds 3 down.
Respects,
Phill
11 December 2012, 08:16
WHITE HUNTER BLACK HEARTBrandon,
Thanks for the kind words...ditto to The Canadian...
Respects,
Phill
11 December 2012, 08:50
Dago RedI like the looks of a drop magazine sometimes, somebody here has a 500 jeffery with one looks great. But you couldn't pay me to shoot this thing, how many pounds of recoil is it?!
Red
My rule of life prescribed as an absolutely sacred rite smoking cigars and also the drinking of alcohol before, after and if need be during all meals and in the intervals between them.
-Winston Churchill
11 December 2012, 09:11
PoppaWNice gun. And it came with a lifetime supply of ammo(5)
WOODY
Everyone is allowed an opinion, even if its wrong.
11 December 2012, 10:08
z375Phill,
That's one pretty thunderstick!! All the lines of a classic bolt-action rifle, love that short forend! What is the inside diameter of the NECG front signt on your rifle? I need one with a 1" I.D but they dont make them that large in the Masterpiece ramps, guess I'll have to just get one made. Please post your results at the range, a few videos would be welcome too!
Cheers!
Zubin
One shot..meat! Two shots...maybe...Three shots...heap shit! - Old Indian adage
11 December 2012, 19:56
600 OverkillAs the other have said---very well done!!! I like everything on it. simple with just the right stuff where needed. Give us the full run down---weight, range report, loads--everything. Unless I missed something, I don't see a muzzle break
12 December 2012, 19:53
SliderIt's WONDERFUL!!!
12 December 2012, 20:52
Hog KillerCan you actually get 4 AIMED shoots off in 15 second, with this cannon?
Keith
IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
12 December 2012, 22:37
WHITE HUNTER BLACK HEARTDago Red,
Depending on load, of course, but, if you go by the minimum load, approximately 160 ft lbs of recoil...and by minimum load I mean a 1000 gr slug @ 2150 fps...I know gents here have used 1000 gr slugs @ 2300 fps+, including Wayne during experimentation...
Respects,
Phill
12 December 2012, 22:44
WHITE HUNTER BLACK HEARTPoppaW,
Respects,
Phill
12 December 2012, 22:47
WHITE HUNTER BLACK HEARTz375,
The inside diameter of the hood/sight is 5/8"...when I get to the range after Christmas and New Years are done, I would be happy to post some fun videos for everyone to laugh at! I'll bring MJOLNIR, my 600 OK sister rifle, and then you can have some deeper chuckles!
Respects,
Phill
12 December 2012, 22:51
WHITE HUNTER BLACK HEART600 Overkill,
Will do on the range report as mentioned earlier...initial loads are Wayne's "factory" rounds using 1000 gr copper alloy slugs @ 2200 fps, that is, until I make up my own after the holidays are done...weight of both my 700 AHR and 600 OK is 12.0 lbs even, empty...I do have a muzzle brake for both rifles, but, since most folks on AR have seen the now infamous AHR brake, I didn't include it in these photos...
Respects,
Phill
12 December 2012, 22:52
WHITE HUNTER BLACK HEARTHog Killer,
Don't know...have yet to try, but, will be fun...make some bucks and bet against me, though!
Respects,
Phill
13 December 2012, 05:00
Malloy805quote:
Originally posted by PoppaW:
Nice gun. And it came with a lifetime supply of ammo(5)
13 December 2012, 06:04
Hog Killerquote:
Originally posted by Hog Killer:
Can you actually get 4 AIMED shoots off in 15 second, with this cannon?
Keith
I figured that was the reason for 3+1.
Keith
IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!!
------------------------------------
We Band of Bubbas & STC Hunting Club, The Whomper Club
15 December 2012, 22:00
bigdoggy2borePhil, that's one fine looking rifle. I houpe you enjoy shooting it.
Used to be bigdoggy700 with 929 posts . Originally registered as bigdoggy 700 in July 2006.
15 December 2012, 23:04
WHITE HUNTER BLACK HEARTKen,
Respects,
Phill
20 December 2012, 15:55
z375quote:
Originally posted by WHITE HUNTER BLACK HEART:
z375,
The inside diameter of the hood/sight is 5/8"...when I get to the range after Christmas and New Years are done, I would be happy to post some fun videos for everyone to laugh at! I'll bring MJOLNIR, my 600 OK sister rifle, and then you can have some deeper chuckles!
Respects,
Phill
Phil,
Apologies for not being clearer in my request, I meant the inside diameter of the band for the NECG front sight, not the hood i.d!! Do they make the Masterpiece Banded sight in a 1.00" internal dia. for the band?
One shot..meat! Two shots...maybe...Three shots...heap shit! - Old Indian adage
20 December 2012, 17:57
Bitterrootz,
The largest diameter banded front sight that we have been able to find is about .945 i.d. sold by NECG. It is a special order part from Germany. We made the front sight on Phill's rifle from scratch as the i.d. is .990 or so. We designed it to use the NECG hood and sight inserts. The sling band is from scratch also. By scratch I mean NOT on a CNC, but by real machining on a lathe and a Bridgeport vertical mill, and a file, by the seat of our pants.
21 December 2012, 23:18
WHITE HUNTER BLACK HEARTHow better can it be said than that?
Respects,
Phill
23 December 2012, 22:18
z375quote:
Originally posted by Bitterroot:
z,
The largest diameter banded front sight that we have been able to find is about .945 i.d. sold by NECG. It is a special order part from Germany. We made the front sight on Phill's rifle from scratch as the i.d. is .990 or so. We designed it to use the NECG hood and sight inserts. The sling band is from scratch also. By scratch I mean NOT on a CNC, but by real machining on a lathe and a Bridgeport vertical mill, and a file, by the seat of our pants.
Wow! Now THAT is the way to go, Wayne! Incredible work, love the way the rifle has come together, form and function melding effortlessly!
One shot..meat! Two shots...maybe...Three shots...heap shit! - Old Indian adage
18 June 2018, 18:44
CertusMmm necromancy..
It won’t let me PM him. Does anyone have pictures of this rifle still? I’m keen to see it.
Cheers,
Troy.
19 June 2018, 09:09
BitterrootI think I have some pics of some sort, somewhere. I believe the OP sold both of these rifles a few years ago and I don't know who owns them now. Naybe Matthew X.