THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Which Warne's Work? or www

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Which Warne's Work? or www Login/Join
 
one of us
posted
I currently have a set of CZ rings for my CZ550 Safari and a Leupold 1.5-5 Vari-x III. I want to mount the scope on the rifle using Warne Quick Detachable Mounts. I went to the Brownells web-site and the Warne web site but couldn't find what size I need or a stock number. Any help appreciated.
 
Posts: 457 | Location: Kentucky | Registered: 25 February 2002Reply With Quote
One of Us
posted Hide Post
Talley offers quick detachable rings for the CZ550, and those are the ones that I would use.

Go to www.huntamerica.com and select the Talley rings option. You can order via internet right from there.
 
Posts: 18352 | Location: Salt Lake City, Utah USA | Registered: 20 April 2002Reply With Quote
one of us
posted Hide Post
I tried Warne QD for my old CZ 550, I think they are for a 19 mm (brno)dovetail, the largest brno/cz dovetail. However, they were crap, shot them to pieces with just 20 full power rounds. I don�t know if the Warnes are to blame or if its CZ�s tolerances that are hard to comply to, but thats my experience with the Warnes anyway. Brownells refunded me so fast I suspect I wasn�t the first one with that problem. I went with conetrol daptar bases and rings, not at all detachable but totally recoil proof and perfect for my use.
Tron
 
Posts: 210 | Location: Oslo, Norway | Registered: 04 October 2002Reply With Quote
one of us
Picture of Robgunbuilder
posted Hide Post
I've had absolutely no problems with the Warne QD rings for the Bruno/CZ550 on any of my guns.-Rob
 
Posts: 6314 | Location: Las Vegas,NV | Registered: 10 January 2001Reply With Quote
One of Us
posted Hide Post
trb,

what actually happened to those rings ?? warne are supposed to be among the best. I have one set of warne qd's for my .375 and have ordered a couple of sets of Talley QD's at the advice of people on this forum for other bigger rifles, I also ordered an extra set of talley screws & levers to replace the spring loaded warne set up at the advice of a poster here, was it the spring loaded feature that was ruined ??. I would have purchased 3 sets of talley's but I already had the warne QD's.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
<ovis>
posted
I use nothing but Warnes and have never had any problem.

Joe
 
Reply With Quote
one of us
posted Hide Post
PC

My Warnes lost the recoil lug, the thingie on the rear rings that go into the recess on the left side of the rear bridge on the action. It was torn of and the rear ring slid with forward, with the scope. Maybe I could have tightened the front ring more around the scope, so it would take up more of the recoil forces, the front ring only moved very slightly. Or maybe my rings were just produced on an early monday morning (you know, shaky production operator...) I don�t know, but the lug on my rings only had maybe a millimeter of contact in the action recess, so either the rings or the action must have been out of specifications.
Tron
 
Posts: 210 | Location: Oslo, Norway | Registered: 04 October 2002Reply With Quote
One of Us
posted Hide Post
Trb,

any possibility that the lug had stress fracture or something of that nature in the metal ??

I had a set of warne fixed mounts on my .585 that withstood about 50 shots with no movement or problem whatsoever, I have taken them of simply because I want detachables, I ordered talley's at the advice of folks here, I also want to see what all the fuss is about. Rob has warne QD's on his .585 as well, I would not despair TRB maybe you happened to get a faulty pair, was warnes customer service hepful with this situation ??
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
PC

My rings appeared to be soft, as the lug came of looking like a blob of overheated solder. I returned the rings to Brownells and got a refund straight away. No explanation though, but I didn�t ask for one either. And I didn�t despair, I just got other rings [Wink] As you say, I might just have got a bad set. Tron
 
Posts: 210 | Location: Oslo, Norway | Registered: 04 October 2002Reply With Quote
one of us
Picture of Big Bore
posted Hide Post
I've over two dozen pairs of Warne Rings, about half QD in either Premier or Maxima style. I've only had a problem with one set and Warne corrected that faster than I could have imagined. They sent out a new set of rings priority mail, plus a pre-paid shipping lable to return the defective set. Other than the one pair, I've never had trouble with any Warne rings, and I've had them on everything from .22LR to .50 BMG.
 
Posts: 641 | Location: Indiana, U.S.A. | Registered: 21 October 2000Reply With Quote
One of Us
posted Hide Post
Big Bore good to see they back up there product. It seems warne & Talley's are the over all best value for money.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Which Warne's Work? or www

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia