I Took a Beautiful MX16 16 gauge Perazzi on consignment this last weekend, it has 28 1/2" barrels choked IC / IM, checkered butt, there wasn't very many of these made, comes in original Perazzi case with all accesories and paperwork, I'll have pix posted soon, asking $7,500.00

Shawn Massey
www.masseysfineguns.com

Here's a picture of the MX16

Being a serious shotgun newbie... Are those chokes with inserts or an integral part of the barrel? Would this be considered a Skeet gun? is it a Right hand gun? could it be adjusted to left hand?

Thanks in advance. Also could you post or link to more detailed pictures of the wood?

Not my gun, but I'll answer a few of your questions. Normally described in that manner, those are integral chokes, not screw in. IC/IM is one of the best combinations for all around HUNTING IMO. Unless you're going to shoot skeet for fun/practice, those chokes are generally considered too tight for skeet, but the IC is basically a skeet choke. Finally, a 16 is not normally considered a skeet ga. for one thing it is difficult to find "target" loads for a 16.

The RH or LH question depends on the stock and whether it is cast off or not. Most of them are slightly cast off for a right hand shooter but the seller can answer this. If it isn't cast off then it would work for both but the lever is probably set up for a RH, I'm not sure how easy this is to change in Perazzis since I've never had that problem.

The wood in the relatively poor picture looks very nice as far as I can tell. Changing stocks on Perazzis is a fairly simple but fairly expensive process.

Thanks, The figure in the wood is what caught my eye. I figured I could load my own 16 Ga target loads but the RH/LH issue is the show stopper. Pretty gun.

Collins

Send me an email and I'll get you some more pictures. This gun is extremely nice with Beautiful wood. As I understand it, there were only 25 of the MX16's made

I forgot to give you my direct email address.

shotgun@pld.com

email sent
ww111@yahoo.com