THE ACCURATERELOADING.COM AMERICAN BIG GAME HUNTING FORUMS


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
9.3x62
 Login/Join
 
one of us
Picture of RMiller
posted
Looking at reloading data and noslers 286 grain bullet this cartridge looks like it would be be a good choice for moose and would be a good choice for brown bear too.
What do you guys think?
 
Posts: 9823 | Location: Montana | Registered: 25 June 2001Reply With Quote
<Mike Dettorre>
posted
It is...think of it as being between a 35 Whelen and a 375 H&H.

------------------
MED

The sole purpose of a rifle is to please its owner

 
Reply With Quote
one of us
posted Hide Post
I think very much of it, so I bought a gun.

CZ 550 Stutzen ( full stocked ) in 9.3x62. It�s a dandy to carry, the trigger is super, but for maximum from the 9.3 cartridge, I sometimes wish i had chosen the longer barreled model.

Perhaps after some game shot, i might buy a second one??

Good shooting! H

------------------

 
Posts: 828 | Location: Europe | Registered: 13 June 2001Reply With Quote
<Pygmy>
posted
RMiller.....Somebody, I believe it was Ray Atkinson, described it as " a .35 Whelen on steroids"...

In any case, I bought a CZ 550 American and plan to try it out on Alaskan moose and caribou next September..

I haven't tried the Nosler partition, but it would be an excellent choice..My rifle is very accurate with all bullets I've tried, but the best performer so far is the 250 Barnes X bullet.....I'm getting half inch three shot groups at 2500 fps....Never expected varmint rifle accuracy out of that rig, nor do I need it, but it is the most accurate hunting rifle in my cabinet....

 
Reply With Quote
<Sunny>
posted
Hi!

Maybe the best bullet will be Swift A-frame 250grains. It`s a better bullet than the Partion and it will also give you higher speed

[This message has been edited by Sunny (edited 01-03-2002).]

 
Reply With Quote
one of us
posted Hide Post
Search under 9.3x62 and you will get a shedload of info all of which is positive.
 
Posts: 2258 | Location: Bristol, England | Registered: 24 April 2001Reply With Quote
<ML>
posted
Hi,

the old 9,3 will all the things do you want!
Its no problem to get about 5000J out of a 24" barrel.
I would suggest the 15g Oryx-very often used in Germany- or the 250grs A-Frame.
Data on request.

Markus

 
Reply With Quote
one of us
Picture of RMiller
posted Hide Post
Thanks guys!
 
Posts: 9823 | Location: Montana | Registered: 25 June 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia