THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    180 Nosler Accubond in the 30-06

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
180 Nosler Accubond in the 30-06
 Login/Join
 
one of us
posted
Has anyone developed a load using the 180 Nosler Accubond in the 30-06? Specifics? I don't want to reinvent the wheel if someone out there already has.
 
Posts: 58 | Location: Plain City, Ohio, USA | Registered: 07 July 2002Reply With Quote
one of us
posted Hide Post
Load them the same as a Ballistic tip or a Partition. IMR 4350, 4831, Reloader 19, 22.
 
Posts: 236 | Registered: 05 December 2003Reply With Quote
one of us
Picture of fredj338
posted Hide Post
I load them the same as for a partition & haven't seen any problems. Velocity is actually a bit lower w/ the same powder charge (about 40fps).
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
posted Hide Post
I don't use 180 grain pellets in my 30-06 but I have had very good results on several of my rifles using the loads in the Nosler No.5 manual designated as the most accurate powder tested and the most accurate load tested with that powder. These loads have worked with my 30-06, 300 RUM and 25-06.

For the 180 grain pellets states that the most accurate powder tested is AA3100 at 54.5 grains.
 
Posts: 257 | Location: Torrance, Ca | Registered: 02 July 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    180 Nosler Accubond in the 30-06

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia