Has anyone developed a load using the 180 Nosler Accubond in the 30-06? Specifics? I don't want to reinvent the wheel if someone out there already has.

Load them the same as a Ballistic tip or a Partition. IMR 4350, 4831, Reloader 19, 22.

I load them the same as for a partition & haven't seen any problems. Velocity is actually a bit lower w/ the same powder charge (about 40fps).

I don't use 180 grain pellets in my 30-06 but I have had very good results on several of my rifles using the loads in the Nosler No.5 manual designated as the most accurate powder tested and the most accurate load tested with that powder. These loads have worked with my 30-06, 300 RUM and 25-06.

For the 180 grain pellets states that the most accurate powder tested is AA3100 at 54.5 grains.