THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
IMR 8208 in 9.3x62mm
 Login/Join
 
One of Us
posted
Has anyone out there done IMR 8208 in a 9.3x62mm?Confused
 
Posts: 538 | Location: North of LA, Peoples Rep. of Calif | Registered: 27 November 2004Reply With Quote
One of Us
Picture of Jeff Sullivan
posted Hide Post
quote:
Originally posted by Fat_Albert:
Has anyone out there done IMR 8208 in a 9.3x62mm?Confused


Nope. Just Varget.






 
Posts: 1229 | Location: Texas | Registered: 08 November 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Nope. Just Varget.

yup...me too

Where does IMR-8208 stand on the burnrate charts?

The burnrate of varget is quite close to the best available for that cartridge.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
A little slower than H322.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
Picture of Jeff Sullivan
posted Hide Post
I have used IMR3031 with 232 gr bullets, but for 250's and 286's which is what I shoot the most, it is always Varget.






 
Posts: 1229 | Location: Texas | Registered: 08 November 2005Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
Rl 15. Never heard of 8208.


****************
NRA Life Benefactor Member
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by butchlambert:
A little slower than H322.
Butch

Thanks Butch.....in that case, I'd think IMR-8208 would be a bit too fast for the 9.3 X 62.....possibly work with the lightest bullets however.

Email Hodgdon's and ask them!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
There was a write up about 8208 in one of the recent gun articles??, but reportedly is a good one for 223-308 range of calibers?? Friend is looking for it and apparently it is not readily available. I believe I would stick with Varget or 4064, very similar.
 
Posts: 1328 | Location: West Virginia | Registered: 19 January 2009Reply With Quote
One of Us
Picture of Snellstrom
posted Hide Post
I've found that Ramshot Big Game is awesome in the 9.3x62, nice speed, and real accurate. I read about it here on AR from some avid 9.3 shooters.
 
Posts: 5604 | Location: Eastern plains of Colorado | Registered: 31 October 2005Reply With Quote
One of Us
posted Hide Post
I've got 48lbs. of the IMR8208XBR. It is supposed to be the latest greatest BR powder. One of our BR shooters put up $250,000 for Hogdon to duplicate the old military surplus 8208 that is long gone. Though a lot of us has bought a lot, it isn't doing what was expected of it. In a PPC the normal load is 29.2 of VV133. It takes about 32 grains of the 8208 to achieve this. I don't think I will try it in my 9.3x62 that I hope to get next week.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
I´d say that VV135 is the ideal powder for the 9.3x62.


http://www.tgsafari.co.za

"What doesn´t kill you makes you stranger!"
 
Posts: 2213 | Location: Finland | Registered: 02 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia