THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Mauser Barrel Dimensions Still Needed

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Mauser Barrel Dimensions Still Needed
 Login/Join
 
dpcd
One of Us
Picture of dpcd
posted
Many thanks to all who provided me data on their barrels; here is what I need now. For a Mauser Type A, 9.3x62, with the extra "step" right in front of the rear sight. Like in the picture, some barrels have a step from the rear sight band to the barrel taper; that is the area I need measurements on. So all you Mauser Sporter collectors, check your rifles and PM me. Thanks again.
 
Posts: 17441 | Location: USA | Registered: 02 August 2009Reply With Quote
freischuetz
One of Us
posted Hide Post
quote:
Originally posted by dpcd:
Many thanks to all who provided me data on their barrels; here is what I need now. For a Mauser Type A, 9.3x62, with the extra "step" right in front of the rear sight. Like in the picture, some barrels have a step from the rear sight band to the barrel taper; that is the area I need measurements on. So all you Mauser Sporter collectors, check your rifles and PM me. Thanks again.



25mm under sight 1st step down to 22,5 then down to 20mm length of step is 6mm.
Measurement taken on original Mauser 9x57 with 4 folding and one fixed express sight

Hope this helps
 
Posts: 395 | Location: Mozambique | Registered: 08 June 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Mauser Barrel Dimensions Still Needed

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia