The Accurate Reloading Forums
Mauser Barrel Dimensions Still Needed

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/8611085591

30 December 2013, 22:20
dpcd
Mauser Barrel Dimensions Still Needed
Many thanks to all who provided me data on their barrels; here is what I need now. For a Mauser Type A, 9.3x62, with the extra "step" right in front of the rear sight. Like in the picture, some barrels have a step from the rear sight band to the barrel taper; that is the area I need measurements on. So all you Mauser Sporter collectors, check your rifles and PM me. Thanks again.
02 January 2014, 12:19
freischuetz
quote:
Originally posted by dpcd:
Many thanks to all who provided me data on their barrels; here is what I need now. For a Mauser Type A, 9.3x62, with the extra "step" right in front of the rear sight. Like in the picture, some barrels have a step from the rear sight band to the barrel taper; that is the area I need measurements on. So all you Mauser Sporter collectors, check your rifles and PM me. Thanks again.



25mm under sight 1st step down to 22,5 then down to 20mm length of step is 6mm.
Measurement taken on original Mauser 9x57 with 4 folding and one fixed express sight

Hope this helps