THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
custom 300 wsm?
 Login/Join
 
one of us
posted
Friday I stop by my gunsmith to discuss a new rifle. I have a Brown SA M700 BDL stock, so I'm thinking about a Borden or Stiller action with Remington bottom metal. He said That a Remington 700 box was not long enough to make an efficient 300 WSM. So I'm thinking no new custom rifle this year or just build another 257 Roberts (I have 4) on a Remington 700SA. What do you think. This is a well known & respected gunsmith.
 
Posts: 1125 | Location: near atlanta,ga,usa | Registered: 26 September 2001Reply With Quote
One of Us
posted Hide Post
Give some thought to the 25 WSSM.
 
Posts: 2627 | Location: Where the pine trees touch the sky | Registered: 06 December 2006Reply With Quote
One of Us
posted Hide Post
why build another 257 roberts when you alreaddy have 4?

make a 300 or a 7mm WSM, id prefer the 7MM if your going long range. just get different box than the remington one and make magic happen!
 
Posts: 735 | Location: New Zealand | Registered: 17 August 2006Reply With Quote
one of us
posted Hide Post
Call me.

Harren's Custom Rifles
2309 Oak Dr.
Ijamsville, Md. 21754
301-831-8068
 
Posts: 868 | Location: maryland | Registered: 25 July 2004Reply With Quote
one of us
posted Hide Post
I think you should find another gunsmith.

I own a Remington 700 XCR chambered in 300WSM and it is a very nice rifle. The Remington action is just fine for this cartridge.

Mine feeds well and I can get all the performance that one should expect out of that cartridge.

Just yesterday I was shooting 180 grain Nosler Partitions into 3/4 inch groups at 3000 fps. What more could you ask of a short magnum?


R Flowers
 
Posts: 1220 | Location: Hanford, CA, USA | Registered: 12 November 2000Reply With Quote
one of us
posted Hide Post
Don't know about your gunsmith but Wyatt makes extended magazine for the Rem short action to handle the WSM cases.
http://www.wyattsoutdoor.com/mag.html


VFW
 
Posts: 1098 | Location: usa | Registered: 16 March 2001Reply With Quote
One of Us
posted Hide Post
ditto the comment on the Wyatt's box... if your smith doesn't know about that, well, you might ought to consider shopping for another
 
Posts: 165 | Location: mississippi | Registered: 12 March 2004Reply With Quote
one of us
posted Hide Post
I made the requirement to use factory Remington bottom metal because the stock is already set up for it & I don't want to weaken the stock. I am probably just not going to build a new rifle this year..I have customs in..257,270,7x57,280,308,30'06,300wm & 35 whelen
 
Posts: 1125 | Location: near atlanta,ga,usa | Registered: 26 September 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia