THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Winchester pre-64 Model 70 in 300 H & H advice on magazine capacity please:

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Winchester pre-64 Model 70 in 300 H & H advice on magazine capacity please:
 Login/Join
 
One of Us
posted
These have a four shot magazine I understand. Does this mean I can put five into the magazine and then close the bolt taking that top, fifth, cartridge into the chamber leaving me the four in the magazine?

Or is it literally four in the magazine and no room to put one on top at all? So I can never actually have one ion the barrel and four in the magazine?
 
Posts: 6824 | Location: United Kingdom | Registered: 18 November 2007Reply With Quote
one of us
posted Hide Post
4 down + 1 in the chamber
 
Posts: 550 | Location: Augusta,GA | Registered: 01 September 2001Reply With Quote
One of Us
posted Hide Post
Thank you. I had wondered if it meant that I could only get four in meaning 3 + 1 in effect.
 
Posts: 6824 | Location: United Kingdom | Registered: 18 November 2007Reply With Quote
One of Us
Picture of El Deguello
posted Hide Post
quote:
Originally posted by mrfudd:
4 down + 1 in the chamber

Four down, depress top round and slide bolt forward 1", then drop #5 into the chamber & lock bolt shut.......


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
 
Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
Most of my rifles have Mauser-type claw extractors like yours. By just putting a round in the chamber and slamming tho bolt home, you will force the extractor to slip over the extractor groove. While most rifles will probably put up with this whithout protest, I for one am somewhat uncomfortable with the practice. When I load my rifles to full capacity, i push the round halfway into the chamber, and then press the case head down a little. This allows it to slip under the extractor, instead of forcing the extractor over. Also, this practice is easier on your case rims.

Good shootin!


Charlie's listening!
 
Posts: 50 | Location: Western Norway | Registered: 29 May 2008Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Winchester pre-64 Model 70 in 300 H & H advice on magazine capacity please:

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia