Go | New | Find | Notify | Tools | Reply |
One of Us |
Using a 150 Grain bullet. The one you rely on for best accuracy. Thanks in advance! Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | ||
|
One of Us |
I use 165gr. Siera Game King over 57 to 58 Gr. of H-4350. Good accurat load out of my three 30/06. It has killed many deer over the years | |||
|
one of us |
150 grn.Balistic Tip and 62 grn. of RL-19. | |||
|
One of Us |
I've never fired a 150gr bullet thru my 30-06's. Actually that's a lie. One year I jimmed around with some loads so I was firing a 150, a 165, and a 180 all to the same point at 100 yards. Why I did it, I can't recall. So, I've never fired a 150 at game. 57grs IMR4350, Rem case, Cci LR primer, 165gr Rem Core Lokt. @2800fps. About as plain jane as you can get but its fetched everything I've ever sent it after. I killed my first elk with an '06 and a 200gr NP bullet. | |||
|
One of Us |
Over the years I've owned four 30-06s and NONE of them did their best with 150gr bullets. I still have two of them and both prefer 165's I am in the process of rebarreling my Rem700 so will have to start over.... I expect that the new standard weight 24" stainless barrel will like the 165's as much as the 22" barrel that's comming off, but anything is possible.... My bolt rifle really likes the 165gr Nosler BT/AB in front of as much Reloader22 as I can make fit in the case. My Semi-auto likes the same bullet in front of 49.5gr of IMR4064, but I'm working up a load for it with the 180gr Nosler partition protected point (the Semi does unpleasant things to exposed lead) If I were restricted to 150gr bullets in the 30-06 I'd probably stick to partitions or Tipped TSX's, possibly the new Nosler.... but the jury is still out on that one. I tend to stick to 165's in the 30-06, which after all is the bullet weight the cartridge was designed for and 102years hasn't changed it much. The really important thing to understand is that even if my rifle were consecutively serial numbered to yours there is no guarantee whatsoever that the two rifles would like the same loads. AD If I provoke you into thinking then I've done my good deed for the day! Those who manage to provoke themselves into other activities have only themselves to blame. *We Band of 45-70er's* 35 year Life Member of the NRA NRA Life Member since 1984 | |||
|
One of Us |
I tried my damnedest to get my Dad's '06 to shoot the 150's, but it wasn't having any of that. I tried Sierra boat tail, Hornady Interlock, Nosler Ballistic Tip and Speer Hotcore (I think). None of them would shoot better than 2" at 100 yards, some over 3"! Needless to say he and I weren't happy, but an old box of Winchester 165gr Powerpoints would go into 1.5" easily, so that was the round he used for that season. The following spring, I tried the 165gr Ballistic Tip and IMR 4350 (can't remember the weight charge, would need to check notes). Regardless, I got them to 2800 fps when they would consistently do under 1.25" and left it at that, that's plenty for big game hunting! Many a deer has bang-flopped to that round. I wished the 150gr would have shot nicely, but then realized I'm not giving up much trajectory at all by moving up to the 165gr. ________ "...And on the 8th day, God created beer so those crazy Canadians wouldn't take over the world..." | |||
|
One of Us |
Hi all, I have a doosey for you! Case = W-W once fired then Full length resized. Primer = CCI LR BR Powder = RL-19 @ 61 gr. Bullet = Nosler BT Cartridge OAL = 3.317" (.020" off lands) Muzzle velosity = 2827 fps. I know it is not the worlds fastest load but it seems to shoot well in many different rifles. My best group to date is a .450" cluster. This load has never gone over an inch if I am paying attn. to what I am doing. I have used this in my Pre-64 Model 70 to kill deer from 25yds out to 343yds. This combo just drips with confidence. Good luck, Doug | |||
|
One of Us |
My former Sako did well with just about anything. The rifle was too heavy though,, so I went and bought a Kimber. It`s a little picky with the loads, but shoot really well with 55 grs IMR 4350 behind a 165grs TSX. | |||
|
one of us |
Sierra 165 GK / N 160 / 60.5 Sierra 180 Pro H / N 160 / 56.5 (or Speer 180 Hot-Cor + same load) All shoot 5 hole in hole at 100 m from my Sauer 202. André DRSS --------- 3 shots do not make a group, they show a point of aim or impact. 5 shots are a group. | |||
|
one of us |
use the 180 grian sierra gameking for deer and the 180 grain barnes x for larger game | |||
|
One of Us |
Federal Premium 180 gr Nosler Partition. If I want something lighter I use the 243, if I need a heavier bullet I grab the 45/70. | |||
|
one of us |
why use the 06 with a 150 gn proj, its like walking backwards , when one is trying to go foward...my load is either 61 gn of NORMA MRP behind 180 nosler for a vel of 2860 or 59 gn of NORMA MRP behind the 200 gn nosler for a vel of 2720 Daniel | |||
|
One of Us |
Rusty, my 30-06 with the 150gr. bullet likes the Sierra gameking Rem. or Win. brass Federal 210 M primer, with Hodgdon 414 powder, other powders work but not as well. 6.5 SWEDE. | |||
|
one of us |
150 grain Partition and, a little more conservative, 61.5 grain of RL19. | |||
|
One of Us |
Rusty, try a Hornady 150 grain SST and (your choice of) H-414 or Win 760 at 59 grains or a bit more if your gun isn't showing pressure signs. This load has killed a few deer and goats for me. Velocity should run 3,000-3,100'/sec. I've had excellent results with ball powders in my M-70. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
one of us |
Using a 180 grain Accubond Roland | |||
|
one of us |
I use 49. gr of "OLD" 4895 under a 150 gr. Bronze point. Has worked well for me for over 40 years. This load is now considered "HOT" or at the top of the loading manuals. I've never had a problem with it in my guns. I bought 1000 150 gr. Bronze points back in the late 60's and still use them as my primary hunting bullet. For-runner of the plastic tipped rifle bullets of today. Probably not as acurate, but have served me well. The problem with America is stupidity. I'm not saying there should be capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? | |||
|
one of us |
Currently loading for three all below with H4350. 150 gr MRX w 58 gr in pre 64 fwt; 168 TSX w 57 gr in pre 64 std ; and 180 gr partition w 56 gr in pre garcia finnbear (rifle has yet to shoot ANY BT bullet/powder I have tried). I think it does help for posters to give load data even though I agree each is like my daughters all a little different and that is a good thing. As always start low and work up. | |||
|
One of Us |
Rusty, I don't load 150gr in 30-06. There is nothing a 150 will do that a 180 won't do better. Kudude | |||
|
One of Us |
Rusty, I'm amazed that it took this long for someone to mention the Ball powders... Thanks to Vapo, you now have all you need to know about the '06 and 150's. It's been WW 760 for me, but that is the virtual twin of H414. Member NRA, SCI- Life #358 28+ years now! DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set. | |||
|
One of Us |
I have no problem using 150s in my 30-06 - a sporterized Springfield with a 1944 vintage 24" 4-grove barrel. I wouldn't used them on anything larger than white-tail deer. I have 2 loads I use with 150 grain Hornady SpirePt and CCI 200 primer. (Chronographed velocities - 3 shot groups.) 56.5 grains - W 760 100 yd group - 0.8" Avg. vel - 2906 fps 59.0 grains - H 4350 100 yd group - 1.5" 200 yd group - 2.0" Avg. vel - 2910 fps Both these loads are lighter than the max load listed in my Hornady manual - but are max for my rifle. | |||
|
One of Us |
RL 19 ,60.5 gr. and a 150 gr accubond in my rem 700 bdl. 57.6 gr of imr 4350 and 150 gr accubond in my mouser. both sub MOA Wayles | |||
|
one of us |
Rusty, Ditto the H4350 load of armadillo. One of my 30-06's is dedicated to 150-grainers and will shoot bugholes with it: RP brass, F210 primer, 59.0 grains of H4350, and about 2900 fps in my 22" barrel. The trajectory closely matches the range-finding reticle of a Springfield Armory scope set up for 223 ballistics. I am good to 600 yards if the wind lets up. | |||
|
one of us |
My $150 used Savage loves 168 SMK's and 56-57 gr IMR 4350 RP Brass Fed 210 Primer. I have the bullets touching the lands, or actually jammed into them is a better term I guess. Windage and elevation, Mrs. Langdon, windage and elevation... | |||
|
One of Us |
My rem loved SMK 168's Moly coat w/ 57 g IMR 4350 CCI primer and win brass | |||
|
One of Us |
My '06 just loves Sierra FB 150 spitzers over 51.5 of Varget (2950 FPS). It will throw them into 3/4 inch all day long. I dislike the bullets, but the gun disagrees with my choices. Until me and the gun can come to some sort of compromise on something else I am short on choices. Thia load is basically the '06 version of a .308 load at 46 grains of Varget under a 150 that is very well recognized for accuracy. A little more or less powder, a shift to 165/168 grainers in either '06 or .308 with Varget is a very easy to work up load. | |||
|
One of Us |
I have loaded for many rifles in the 06. With any bullet weight a good powder is IMR-4350. But with the 150s other really good powders are RL-19 , IMR-4064 , H-414 , WIN-760. You will have to work up your own charge weight as i am a lazy slob this morning and don,t feel like grabbing my book. ...tj3006 freedom1st | |||
|
one of us |
Try some 150 gr Speer Mag Tips with Rel 19. Remember, forgivness is easier to get than permission. | |||
|
one of us |
48 Grains of IMR4895, or 48 grains of WW748, on top of a 150 grain whatever, is the basic "military load, and works exceptionally well in auto rifles as well as bolt guns. A good accurate load, that has been proven over time on rifleranges all across America. Also it will flat knock a deer's "nose" in the dirt. Jerry NRA Benefactor Life Member | |||
|
one of us |
I use IMR4350 59.9grs for my 150 gr bullet. It gives me 2998 FPS.Barrel Length 25" And it likes Hornady 150 GE flat base BULLETS | |||
|
One of Us |
59 grains of MR-3100 with 150 grain Winchester Power Point bullets is what my Mannlicher-Schoenauer likes best. Velocity runs only 2700 fps (the origional velocity that made the .30'06 famous) but, my whitetail hunting range is at most 100 yards so I'm not really at a disadvantage. | |||
|
One of Us |
49 grs h4895 under 150 gr sierra game kings... Deadly on whitetails and Muleys...extremely accurate...fun round to shoot at the range etc. | |||
|
one of us |
49 grns of H4895 under 150 NABs is the best load I've ever fired from one of my 06s. It also does well with max charges of H4350 under 150s. When I load 150s for someones 06, those are my two top choices. Good Luck Reloader | |||
|
One of Us |
LC61 Brass 150gr Sierra Gameking Federal 210 Primer 59 Gr Imr 4350 10 Shot group .7in in my Sako. Drop 2 gr eacg for 165 and 180 grain, same results In politics as in theology! "The heart of the wise inclines to the right, But the heart of the fool to the left." Ecclesiastes 10:2 | |||
|
One of Us |
I have loaded for at least a dozen 3006s over the years. All of them liked imr 4064 (usually 52 grains work up from 50) cci200 primers and a 150 gr bullet. Shoots into an inch sometimes less with most rifles. | |||
|
one of us |
Hard to justify handloading the '06 when my rifle will shoot $13.00 a box 180 grain Remington Corelocs into 3/4 inches for ten shots...for elk or African plains game 180 grain Federal HE's go into 1.5 inches at 200 yards. The true measure of a hunters skill is not the size of the trophy but rather the length of the shot with the greater measure of skill being the shorter shot---Jeff Cooper | |||
|
One of Us |
Thank you all for your input! JNC91, where do you find $13.00 180 grain Remington Core Lokts? Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
one of us |
Walmart. I think that is what I paid last time I bought some, Maybe it was $14.00, they are still cheap. Jeff The true measure of a hunters skill is not the size of the trophy but rather the length of the shot with the greater measure of skill being the shorter shot---Jeff Cooper | |||
|
one of us |
52 grs imr 4064 150 sierra or speer b.t. 2930 fps .750 at 100 meters | |||
|
One of Us |
My only "all weather" rifle is a SS Weatherby 30-06. I use 150 Gr. Nosler Partitions for deer and antelope (59 Gr 4831). For all elk and bear and boar, I use 180 Gr. Swift (54 Gr. 4350). From a practical point of view, I need no other rifle or loads. But desire can override practicality. WYLD | |||
|
Powered by Social Strata | Page 1 2 |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia