THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    CZ 550 9.3x62 Rifling Twist Rate

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
CZ 550 9.3x62 Rifling Twist Rate
 Login/Join
 
one of us
posted
I picked up a new CZ 550 in 9.3x62, and was wondering if anyone knows what the barrel's rifling twist rate is? I tried to measure it with my cleaning rod and a brass bore brush and got a rough reading of 1 in 15". I had emailed CZ with this same question a few weeks ago and got a reply of 1 in 9.5"...I don't think so!! Thanks!
 
Posts: 92 | Location: Tracy, CA | Registered: 15 March 2003Reply With Quote
one of us
posted Hide Post
The CZ catalog list the twist rate at 1:9.5".
 
Posts: 271 | Registered: 11 May 2003Reply With Quote
one of us
posted Hide Post
CoonDawg,

That's what CZ said in their email, but mine can't be 1 in 9.5". I've tried this "rough" measurement technique before and have always been + or - one inch the published rate. And doesn't 1 in 9.5" seem awfully steep for a 9.3? Twist rates for .358's typically run from 1 in 12" to 1 in 16", and .375 twist rates typically are around 1 in 12". .366 is sandwiched right in-between so you'd think it would be similiar?

For what its worth, Sako's 9.3x62 rate is 1 in 14".

Thanks for the reply!

Joe

[ 08-15-2003, 10:09: Message edited by: JKuczmarski ]
 
Posts: 92 | Location: Tracy, CA | Registered: 15 March 2003Reply With Quote
one of us
posted Hide Post
Yes you are right. That was listed in the 2003 catalog, depending on when your rifle was built it could be a 1-10 or 1-12.

Most standard twist rate that I have found for the .366 has been 1-14 but know barrel makers that do 1-10 to the standard 1-14.

This may sound a little stupid but double check the bore size not the markings on the barrel. I have seen new Remmingtons marked one thing and found out it was a DIFFERENT CALIBER [Eek!] [Eek!] . No more Remmys for me. Bought a 7mm and it turned out to a 30 cal bore [Frown] what an eye opener!

If it turns out to be a different caliber I'ld take it back and get the right caliber 9.3x62 you wanted.
 
Posts: 271 | Registered: 11 May 2003Reply With Quote
one of us
posted Hide Post
Hi JK
midway is selling douglas bbls in 9,3x62 and stailess their twist rate is 1/12. take a look in the midways catalog.
regards
danny
 
Posts: 1127 | Location: Sweden | Registered: 19 June 2000Reply With Quote
one of us
posted Hide Post
Danny you are right Midway does list them and a 30 days because its a special order. JK would be better off calling Douglas like I did they told me 2-3 weeks delivery. Douglas will do a 1-10 twist for the 9.3mm.
 
Posts: 271 | Registered: 11 May 2003Reply With Quote
one of us
posted Hide Post
CZ USA has a web sight:
www.cz-usa.com
1-800-955-4486
I Asked for a catalog and what was the twist of their .22 Hornet. Their reply came back 1 in 16.
They should be able to tell you what you need to know.
 
Posts: 355 | Location: Roanoke, Virginia | Registered: 29 May 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    CZ 550 9.3x62 Rifling Twist Rate

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia