One of Us
| pull the action out of the stock there sould be a allen head with two lock nuts. it should be in the book that was with the rifle. |
| Posts: 166 | Location: Alaska | Registered: 05 October 2009 |
IP
|
|
One of Us
| Oh Boy! I'll have to see if I can find the book. |
| Posts: 835 | Location: Plover, Wi | Registered: 04 October 2009 |
IP
|
|
One of Us
| you just backout the allenhead get it to about 3 pound lbs then thighten the locknuts i think there was red lockthight on mine also but there was only one allenhead on the trigger. have you pulled the action form the stock? |
| Posts: 166 | Location: Alaska | Registered: 05 October 2009 |
IP
|
|
One of Us
| Found my book. Nothing about trigger adj. The book says to take it to a gunsmith. I don't have the action pulled. |
| Posts: 835 | Location: Plover, Wi | Registered: 04 October 2009 |
IP
|
|
One of Us
| I just pulled my Kimber out of the stock it came with two books one just for the trigger but it did say to take it to a gunsmith. There are two Allen head screws on the front of the trigger housing if you loosen the bottom Allen head screw that will decrease the trigger weight. |
| Posts: 166 | Location: Alaska | Registered: 05 October 2009 |
IP
|
|
One of Us
| I had it mixed up with my TC icon that way I thought there was only one allen head screw . I think on my I only got it down to about 3.25lbs but that good for me on a hunting rifle. Good luck |
| Posts: 166 | Location: Alaska | Registered: 05 October 2009 |
IP
|
|