Can someone tell me how to decrease trigger pull. My rifle is set at 4 lbs. Would like to decrease to 2 3/4 to 3 lbs. I can't seem to find antthing on the Kimber website. There used to be a page where you could download. I'm pretty mechanically inclined so, I should be able to do it myself.
Thanks

pull the action out of the stock there sould be a allen head with two lock nuts. it should be in the book that was with the rifle.

Oh Boy! I'll have to see if I can find the book.

you just backout the allenhead get it to about 3 pound lbs then thighten the locknuts i think there was red lockthight on mine also but there was only one allenhead on the trigger. have you pulled the action form the stock?

Found my book. Nothing about trigger adj. The book says to take it to a gunsmith.
I don't have the action pulled.

I just pulled my Kimber out of the stock it came with two books one just for the trigger but it did say to take it to a gunsmith. There are two Allen head screws on the front of the trigger housing if you loosen the bottom Allen head screw that will decrease the trigger weight.

I had it mixed up with my TC icon that way I thought there was only one allen head screw . I think on my I only got it down to about 3.25lbs but that good for me on a hunting rifle. Good luck