THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Page 1 2 

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
One load for a 30.06
 Login/Join
 
One of Us
posted
Hello,
If you could only have or load 1 load for a 30.06 what would it be.
The rifle is to be used in the west hunting Deer, Elk and Bear. 100-300 yards.
I have always used Winchester 165gr "silvertips" but am running low and cant find them any more.
Lets hear your opinions please.
Thanks
Greg


..."its not a collection if you only have one"....
 
Posts: 102 | Location: Idaho | Registered: 17 December 2011Reply With Quote
One of Us
posted Hide Post
Hornady Interloks in the 165 gr have worked very well for me in Colorado. Don't always exit an elk but they still take them down and the penetration is more than sufficient to take the bullet to the off side hide on a lung/shoulder shot.
Or might even consider the 165 gr Barnes TSX I know that bullet will work quite well.
 
Posts: 4214 | Location: Southern Colorado | Registered: 09 October 2011Reply With Quote
One of Us
posted Hide Post
A 180 gr. bullet with 56 gr. IMR4350.
 
Posts: 1324 | Location: Oregon rain forests | Registered: 30 December 2007Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
aq 180 accubind will do it all and with room to spare.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of Alberta Canuck
posted Hide Post
The one .30-'06 load I have used for the last 40 years in the U.S. and Canada for all sizes of game is surplus G.I. brass, Winchester or RWS primers, either 53.0 or 54.0 grains (whichever is most accurate in a particular rifle) H-4831 (not short cut), and 200 grain Nosler Partitions. It is a heavy enough bullet that it does not explode on small thin skinned animals, and a heavy enough bullet that it does penetrate clear through moose lengthwise.

I have used this load in rifles from the Remington 742 autoloader carbine through all kinds of bolt action guns...mainly though, in my Winchester pre-war Model 70 standard weight.

It is not an ideal 500 yard load because of the trajectory at long, unknown distances, but does just fine at 300+ long paces.

It is NOT satisfactory for use in a Garand because of the high muzzle end port pressure.


My country gal's just a moonshiner's daughter, but I love her still.

 
Posts: 9685 | Location: Cave Creek 85331, USA | Registered: 17 August 2001Reply With Quote
One of Us
Picture of Ghubert
posted Hide Post
I bugger about a lot with loads with my 30.06 but really and truly could do everything I need to in Europe with a 180gr Hornady interlock and 60gr H4831SC.

It's not the fastest load but shoots three touching from my rifle and does the job out to 400 yards at least.
 
Posts: 11731 | Location: London, UK | Registered: 02 September 2007Reply With Quote
one of us
Picture of Blacktailer
posted Hide Post
Since you have been using 165gr, stick with that. Any premium bullet should work, just go with the one that is accurate in your rifle at the velocity you want.


Have gun- Will travel
The value of a trophy is computed directly in terms of personal investment in its acquisition. Robert Ruark
 
Posts: 3830 | Location: Cave Creek, AZ | Registered: 09 August 2001Reply With Quote
one of us
posted Hide Post
That is easy, the 200 gr. Nosler Partition at 2700 FPS..I would and have hunted most of the worlds soft skinned game including Eland and Cape Buffalo with that load. It would be my choice for deer, antelope and elk also, but the 180 gr. Nosler bullet at the same velocity is excellent choice also for the NA continient, except for the big bears and it will work on them for sure, but I feel better with the 200 gr...It is a superb elk load even on going away Texas Heart shots in close range Idaho timber.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42190 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
57grs IMR4350 + 165gr NP. Or a 165gr Corelokt. I've tried this load in several '06s and it's been a good one every time.


Aim for the exit hole
 
Posts: 4348 | Location: middle tenn | Registered: 09 December 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by wasbeeman:
57grs IMR4350 + 165gr NP. Or a 165gr Corelokt. I've tried this load in several '06s and it's been a good one every time.


Interesting comments, no clear cut winner but I did ask for opinions.

I was actually considering loading a round of 165 NP's. I have always liked the Noslers.


..."its not a collection if you only have one"....
 
Posts: 102 | Location: Idaho | Registered: 17 December 2011Reply With Quote
One of Us
posted Hide Post
A 180 grs NP would have almost the same trajectory, and pack a bit more punch.

M
 
Posts: 413 | Location: Norway | Registered: 14 May 2009Reply With Quote
One of Us
posted Hide Post
I have been successfully using Barnes 165 gr Triple Shocks on everything up through elk as well as on my safari this year.


DRSS
Kreighoff 470 NE
Valmet 412 30/06 & 9.3x74R
 
Posts: 1993 | Location: Denver | Registered: 31 May 2010Reply With Quote
One of Us
Picture of zimbabwe
posted Hide Post
Have actually only used the 30-06 in Africa but my load was with a 220gr Nosler Partition and it had no problem on everything up thru Wildebeest. Many animals taken from Impala up. That with my 375H&H I would feel adequately prepared for any occaison.


SCI Life Member
NRA Patron Life Member
DRSS
 
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by mrbofus:
Hello,
If you could only have or load 1 load for a 30.06 what would it be.
The rifle is to be used in the west hunting Deer, Elk and Bear. 100-300 yards.
I have always used Winchester 165gr "silvertips" but am running low and cant find them any more.

If you read the book "One Man, One Rifle, one land", the author used a Remington 700 ADL and a custom handload using the 180 gr. Nosler partition for most of hunt hunting. His goal was to collect all the species of huntable North American big game. Based on the weight and thickness of the book, he was pretty successful. Unfortunately, there was very little detail on the load other than what I've said. Frowner he had someone other than himself load his ammo. He may have on occasion also used some 165 gr. Nosler partitions.
I guess if it were me, I'd just do the 180's for everything.
Paul B.
Lets hear your opinions please.
Thanks
Greg
 
Posts: 2814 | Location: Tucson AZ USA | Registered: 11 May 2001Reply With Quote
one of us
Picture of buckeyeshooter
posted Hide Post
quote:
Originally posted by Ghubert:
I bugger about a lot with loads with my 30.06 but really and truly could do everything I need to in Europe with a 180gr Hornady interlock and 60gr H4831SC.

It's not the fastest load but shoots three touching from my rifle and does the job out to 400 yards at least.



same load but I use a 180 grain nosler partition.
 
Posts: 5719 | Location: Ohio | Registered: 02 April 2003Reply With Quote
One of Us
Picture of Ghubert
posted Hide Post
quote:
Originally posted by buckeyeshooter:
quote:
Originally posted by Ghubert:
I bugger about a lot with loads with my 30.06 but really and truly could do everything I need to in Europe with a 180gr Hornady interlock and 60gr H4831SC.

It's not the fastest load but shoots three touching from my rifle and does the job out to 400 yards at least.



same load but I use a 180 grain nosler partition.


For tough hunts away from home I would do the same, but they are very expensive over here and the hornady does everything below bear and moose. That's more of a personally imposed limit than a reflection on the bullet but a 180gr NP or 200gr Accubond just makes me feel a little better for really big stuff. Big Grin
 
Posts: 11731 | Location: London, UK | Registered: 02 September 2007Reply With Quote
one of us
Picture of DJM
posted Hide Post
How about 168gr Ballistic Tips or Combined Tech Ballistic Silver Tips
 
Posts: 585 | Location: Lincolnshire, England | Registered: 12 June 2002Reply With Quote
One of Us
Picture of Ghubert
posted Hide Post
quote:
Originally posted by DJM:
How about 168gr Ballistic Tips or Combined Tech Ballistic Silver Tips


I would but unfortunately you wanted them.... hilbily hilbily
 
Posts: 11731 | Location: London, UK | Registered: 02 September 2007Reply With Quote
one of us
posted Hide Post
150 grain TTSX. Will do everything a 165 or 180 grain jacketed bullet will do, while shooting flatter and faster.
 
Posts: 2852 | Location: Michigan | Registered: 02 September 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Ghubert:
a 180gr Hornady interlock and 60gr H4831SC.

It's not the fastest load but shoots three touching from my rifle and does the job out to 400 yards at least.


I guess I dont get that concerned with "speed" of the bullet. I am more concerned with accuracy and bullet energy. Bullet speed=energy but faster isnt always better,
so i would agree with your statement.
Thanks
Greg

Another reason I've asked this is because I also have a 300 Win Mag. But the .06 have always been my go to.


..."its not a collection if you only have one"....
 
Posts: 102 | Location: Idaho | Registered: 17 December 2011Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
popcornPersonally the 180 or 200 grain NP would be hard to beat at 06 velocities. For that matter most of the cup and core would be fine unless you're expecting full penetration with Texas heart shots on bull moose. Don't see how you can go wrong. beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by bartsche:
popcorn full penetration with Texas heart shots on bull moose. beerroger


Thanks,
Personally this is something I would NEVER do. But good to know in case the demons in my head win out.


..."its not a collection if you only have one"....
 
Posts: 102 | Location: Idaho | Registered: 17 December 2011Reply With Quote
one of us
posted Hide Post
The more i use the 200 N P in my 06 the more i like it @2700, its effective on the really small stuff like impala,/ chamios,hog deer etc, and on the bigger stuff like Sambar sable kudu zebra Brown Bear s lacks absolutley nothing
The 180 @2850-2900 is not a bad choice either
 
Posts: 1488 | Location: AUSTRALIA | Registered: 07 August 2001Reply With Quote
One of Us
Picture of Bigbird34
posted Hide Post
This load is an accurate load,that has made many nonbelievers into believers,when it comes to reloading,as they can shoot under a M.O.A.

Sierra 165 SBT
IMR 4895 (45 gr's)
Any Large rifle primer.

BB34
 
Posts: 126 | Location: Vermont | Registered: 16 February 2008Reply With Quote
One of Us
posted Hide Post
Same as I said for the 300 Win, probably the 168gr TSX. Not sure on the powder, I haven't reloaded for a 30-06 before (never actually owned one either!) but I'm going to swallow some pride after years of never supporting it, and try! Got one on layaway (although it was the gun that made the decision, not the caliber)


If you think every possible niche has been filled already, thank a wildcatter!
 
Posts: 2287 | Location: CO | Registered: 14 December 2007Reply With Quote
one of us
posted Hide Post
I'd probably use whatever 180 grain or 200 grain controlled-expansion bullet shot best in the rifle. I'd avoid the softer cup and core bullets (speer, sierra, Nosler balistic tip, etc).
 
Posts: 641 | Location: SW Pennsylvania, USA | Registered: 10 October 2003Reply With Quote
One of Us
posted Hide Post
I really like the "one load for everything" and do exactly that most of the time...

When i lived where their were big bears, i carried 200NP's all the time in my 30-06's and 300 mags, but for the rest of the US, i would carry 180NP's.

DM
 
Posts: 696 | Location: Upper Midwest, USA | Registered: 07 February 2007Reply With Quote
One of Us
posted Hide Post
Both of my 30-06's are loaded with 180gr Sierra Pro Hunter bullets and IMR4350.
 
Posts: 892 | Location: Central North Carolina | Registered: 04 October 2007Reply With Quote
One of Us
Picture of cobra
posted Hide Post
180 gr. Swift A-Frames and RL-19.


 
Posts: 8827 | Location: CANADA | Registered: 25 August 2004Reply With Quote
One of Us
Picture of Scott King
posted Hide Post
I am suprised the TSX doesn't get better press here.

I've used 165g tsx's on interior grizzly, dall sheep and mule deer with great results. I had excellent penetration, accuracy and expansion.

When I took the my 30-06 to Africa a couple of years ago I used the 180g tsx on kudu, impala and bushbuk with the same results mentioned above.

I wouldn't think twice about using the 165g tsx on all lower 48 game.
 
Posts: 9584 | Location: Dillingham Alaska | Registered: 10 April 2006Reply With Quote
One of Us
Picture of Wstrnhuntr
posted Hide Post
54.5 grs IMR 4350 behind a 180 gn Hornady interlock. I think the velocity was about 2750 fs.. I also use this load with accubonds.



AK-47
The only Communist Idea that Liberals don't like.
 
Posts: 10186 | Location: Tooele, Ut | Registered: 27 September 2001Reply With Quote
One of Us
Picture of Dave Bush
posted Hide Post
quote:
Originally posted by Hasher:
I have been successfully using Barnes 165 gr Triple Shocks on everything up through elk as well as on my safari this year.


+1 tu2


Dave
DRSS
Chapuis 9.3X74
Chapuis "Jungle" .375 FL
Krieghoff 500/.416 NE
Krieghoff 500 NE

"Git as close as y can laddie an then git ten yards closer"

"If the biggest, baddest animals on the planet are on the menu, and you'd rather pay a taxidermist than a mortician, consider the 500 NE as the last word in life insurance." Hornady Handbook of Cartridge Reloading (8th Edition).
 
Posts: 3728 | Location: Midwest | Registered: 26 November 2006Reply With Quote
One of Us
Picture of Snellstrom
posted Hide Post
My one load for everything load in my 30/06 is 56 grains of IMR-4350, CCI or WW primers with WW brass and a 180 grain Sierra SPBT.
Very accurate and works perfect for me on Numerous Elk, Deer, Antelope, Bighorn Sheep, Mountain Goat, Coyotes, Marmots, Hogs, Ravens etc.
I tried Speer, and Accubonds in the same weight with less than stellar results.
Partitions don't give me the same accuracy so I stick with Sierra.
 
Posts: 5604 | Location: Eastern plains of Colorado | Registered: 31 October 2005Reply With Quote
one of us
posted Hide Post
I see one load depends on who is using the rifle, I see a lot of recommendations doting on the 165 gr. bullets and I suppose they work pretty good on local stuff..but if confined to one load are you ready to take on an Alaskan Brown bear, or a African Cape buffalo or Lion, even and elephant..If so your backside is showing...but you can use a 220 gr. Nosler and any of Africas big 5 IMO, and get away with it, even on elephant, great on Lion, good enough on buffalo and hippo, and on elephant with a heart shot,not ideal but it'll do if you ain't got anything better..I know many an African that has made it work including Phil Shoemakers son while guiding in Africa. His backup was a 30-06 and he is still around. I have shot buffalo, hippo and backed up on lion with the 220 gr. Nosler...

My favorite options is a 200 gr. Nosler at 2700 FPS for all but buffalo Hippo and Elaphant, I really prefer a 404 for those 3 buggers, if I have the option.

Given on a bet or a one year free hunt to walk from the cape to the Kenya border and live off tha land, and I had to pack all my gear on my body, then the 30-06 and 220 gr. GS Customs Flat nose solids would be my choice. that is the only true ALL AROUND LOAD IN THE 30-06.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42190 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of Doc
posted Hide Post
quote:
Originally posted by Dave Bush:
quote:
Originally posted by Hasher:
I have been successfully using Barnes 165 gr Triple Shocks on everything up through elk as well as on my safari this year.


+1 tu2


168 TSX or TTSX over stout charge of 4350. Everything I've used that load on was dumped on the spot. First few were TSX bullets, last 2 were with TTSX.

Sure 180s and 200s are nice but I prefer a better blend of speed with good bullet wt. tu2


Ted Kennedy's car has killed more people than my guns
 
Posts: 7906 | Registered: 05 July 2004Reply With Quote
One of Us
Picture of Scott King
posted Hide Post
quote:
Originally posted by Atkinson:
I see one load depends on who is using the rifle, I see a lot of recommendations doting on the 165 gr. bullets and I suppose they work pretty good on local stuff..but if confined to one load are you ready to take on an Alaskan Brown bear, or a African Cape buffalo or Lion, even and elephant..If so your backside is showing...but you can use a 220 gr. Nosler and any of Africas big 5 IMO, and get away with it, even on elephant, great on Lion, good enough on buffalo and hippo, and on elephant with a heart shot,not ideal but it'll do if you ain't got anything better..I know many an African that has made it work including Phil Shoemakers son while guiding in Africa. His backup was a 30-06 and he is still around. I have shot buffalo, hippo and backed up on lion with the 220 gr. Nosler...

My favorite options is a 200 gr. Nosler at 2700 FPS for all but buffalo Hippo and Elaphant, I really prefer a 404 for those 3 buggers, if I have the option.

Given on a bet or a one year free hunt to walk from the cape to the Kenya border and live off tha land, and I had to pack all my gear on my body, then the 30-06 and 220 gr. GS Customs Flat nose solids would be my choice. that is the only true ALL AROUND LOAD IN THE 30-06.


Ray, the question regards western lower 48 hunting, not Africa or anywhere else.

I'd not prefer a heavy bullet in the -06 for this particular application for velocity/ trajectory reasons. The 165g tsx shoots flatter and penetrates well.
 
Posts: 9584 | Location: Dillingham Alaska | Registered: 10 April 2006Reply With Quote
One of Us
Picture of drummondlindsey
posted Hide Post
quote:
Originally posted by Scott King:
Ray, the question regards western lower 48 hunting, not Africa or anywhere else.

I'd not prefer a heavy bullet in the -06 for this particular application for velocity/ trajectory reasons. The 165g tsx shoots flatter and penetrates well.


When your as worldly as old Ray it's hard to speak about just one region of earth Big Grin

I agree with your opinion about the 165g tsx
 
Posts: 2094 | Location: Windsor, CO | Registered: 06 December 2005Reply With Quote
One of Us
Picture of Jeff Sullivan
posted Hide Post
I bought a Blaser K95 in 30-06 a few weeks ago, and I bought 800 rounds of RWS 184 gr Rap-X ammo from Midway. Fortunately, my gun seems to really get along well with it, so I figure that will be my "one load" for my only 30-06. Wink






 
Posts: 1229 | Location: Texas | Registered: 08 November 2005Reply With Quote
One of Us
Picture of Wstrnhuntr
posted Hide Post
quote:
Originally posted by Scott King:
I'd not prefer a heavy bullet in the -06 for this particular application for velocity/ trajectory reasons. The 165g tsx shoots flatter and penetrates well.


I expect these results will vary from one rifle to another, but when I was comparing on the chrony with my rifle I got little or nothing more out of the 165's than I did the 180's. That means the 180's will actualy cary flatter and farther, at least from my rifle. I do believe that the 165'ish slugs are the optimum from a .308 win though.

YMMV.



AK-47
The only Communist Idea that Liberals don't like.
 
Posts: 10186 | Location: Tooele, Ut | Registered: 27 September 2001Reply With Quote
One of Us
posted Hide Post
All shots under 300yds, I like 180gr Sierra GameKing, CCI large rifle standard primer, Win case, 52gr IMR 4350 COAL 3.33inches. This is not a fast load. It is an extremely accurate load in every 30-06 I have ever owned.


We Band of Bubbas
N.R.A Life Member
TDR Cummins Power All The Way
Certified member of the Whompers Club
 
Posts: 2973 | Location: South Texas | Registered: 15 January 2008Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia