THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    8x68S Shooters, a few questions please.

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
8x68S Shooters, a few questions please.
 Login/Join
 
lawndart
one of us
posted
How long is the magazine box on your rifle? How wide is it at the back and shoulder?
If you rifle is a mauser, is metal milled off the back of the ejection port as well as the front to make room, or just off the front?

Thanks for your help.

I hope to comission one that feeds and functions smoothly and safely.

LD


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
Safarischorsch
One of Us
posted Hide Post
quote:
Originally posted by lawndart:
How long is the magazine box on your rifle? How wide is it at the back and shoulder?
If you rifle is a mauser, is metal milled off the back of the ejection port as well as the front to make room, or just off the front?

Thanks for your help.

I hope to comission one that feeds and functions smoothly and safely.

LD



I am sorry!

My 8x68S rifle is standing far away in our hunting area...
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
ALF
one of us
posted Hide Post
.
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
lawndart
one of us
posted Hide Post
Thanks ALF.

LD


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
z1r
one of us
Picture of z1r
posted Hide Post
Alf.

95mm? Is that the inside mag measurement? Seems awfully long for a cartridge whose OAL is 87mm.




Aut vincere aut mori
 
Posts: 4869 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
ALF
one of us
posted Hide Post
.
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
lawndart
one of us
posted Hide Post
3.425" + .125" = 3.550" = 90.2mm

Perhaps the manufacturers use a single sized magazine for more than one cartridge. The 8x68S seems to be just short of midwayb between the 30-06 class length and the 300 H&H class length.


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
Tex21
one of us
Picture of Tex21
posted Hide Post
95mm is just shy of 3.75".

Alf, normally I am not one to disagree with you, but in my opinion this is a bit long for the 8x68s.


Jason

"Chance favors the prepared mind."
 
Posts: 1449 | Location: Dallas, Texas | Registered: 24 February 2004Reply With Quote
ALF
one of us
posted Hide Post
.
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
lawndart
one of us
posted Hide Post
Having a magazine box of generous length is a nice twist on things.

Usually we all have our hacksaws and welding rigs out trying to add a few mm's.

Thanks again for the measurements ALF.

Every cartridge worth using was invented by 1930.

LD


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    8x68S Shooters, a few questions please.

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia