THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Feeding the 270 Weatherby
 Login/Join
 
one of us
posted
Folks,

I just had a rifle rebarrelled to 270 Weatherby with 26" Douglas barrel. At this time I have only tried factory Weatherby ammo with the 150 gr. Hornady bullet which it shoots fairly well. The rifle has the standard Weatherby throat and I was wondering what loads have worked for any 270 Weatherby shooters on the forum. If the rifle will shoot them I'd like to use the 130 TSX or NP.

THX

Mark


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 13091 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
one of us
posted Hide Post
Mark, if you've not already looked;

http://www.reloadersnest.com

Try Steve's pages also.

DB
 
Posts: 1370 | Location: Home but going back. | Registered: 15 December 2003Reply With Quote
one of us
posted Hide Post
FWIW, IMR 7828 is supposed to be one of the powders to make this round really come alive...

IMR .270 Wby Data

- mike


*********************
The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart
 
Posts: 6653 | Location: Switzerland | Registered: 11 March 2002Reply With Quote
one of us
posted Hide Post
Mark I had a custom Mauser built last year in 270 Wby. A max load of 7828 and the 130 TSX groups about 1 inch @ 200 yds. I used this rifle on a huge old Saskatchewan whitetail buck this fall. One shot @ 300yds,one picture perfect mushroomed TSX bullet and one old buck just flopped on the ground. RL25 also provided some very good groups and will warrant futher testing next spring.
 
Posts: 2443 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
One of Us
posted Hide Post
Mark I've mainly worked with the 150's if I remember right.

And for what it is worth in both of those rifles it shot the 150 Horns and IMR 4350 into little tiny bug holes!

Mark D
 
Posts: 1089 | Location: Bozeman, Mt | Registered: 05 August 2005Reply With Quote
One of Us
posted Hide Post
Mark-
I loaded 270 Wby with IMR 7828, and it's one of the best powders going. It was also the only powder that worked well with the 140 grain XBT bullet giving 3350 FPS. RL25 might be a good one, but RL22, and H1000 were far faster burning then expected and gave pressure signs way before top velocities were reached. In fact, I didn't break 3200 FPS until I tried IMR 7828, and that was in a Winchester model 70 with 26" barrel.

I have always held the opinion that the 270 was a calibre that demanded premium bullets; it's especially true in the Weatherby round. Today's TSX is much improved compared to the original X and XBT, so give IMR 7828 a try.
 
Posts: 3889 | Registered: 12 May 2005Reply With Quote
one of us
Picture of Charles_Helm
posted Hide Post
I've had good luck with the Weatherby factory loads -- 130 grain Partition and 140 grain Barnes X.
 
Posts: 8773 | Location: Republic of Texas | Registered: 24 April 2004Reply With Quote
one of us
posted Hide Post
THX guys! Ordered some 130 TSX's today. Already have some 7828 so I'm good to go.

Mark


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 13091 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia