THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Rem SAUM's?
 Login/Join
 
One of Us
posted
One hardly hears of these in the 'literature' and I have never seen one, while the WSM's are quite common?

Dead in the water?

The RUM's seems to have a bit of a following but even the most hype mongering gun rags seem to be mum on the SAUMS?

(the 700 BDL, CDL, Sendero and MTN are not so chambered, only the Mod 7 with a 22" barrel)
 
Posts: 1274 | Location: Alberta (and RSA) | Registered: 16 October 2005Reply With Quote
one of us
Picture of Reloader
posted Hide Post
I purchased a 300SAUM in a sendero before they quit chambering it in the SAUMs.

It is very accurate and gives descent speed. I don't try and Max it out at all and I'm easily pushing 168s alittle over 3000. My main gripe w/ the 700 SAs is the long throats, you can't even get close to the lands w/ many bullets due to the 2.825 clip length.

I find the round to be inbetween the 30-06 and 300WSM in performance.

I don't believe I would buy one in a Model 7 by personal preference nor would I buy one if I weren't a handloader as Remington is about the only ammo maker producing factory ammo for the SAUMs and it's quite scarce to find locally.

W/ a set of Forester dies and a pile of brass, she'll dance.

Good Luck

Reloader
 
Posts: 4146 | Location: North Louisiana | Registered: 18 February 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Dead in the water?


IMO both Winchester and Remington vastly overestimated our love for short action rifles.
The WSMs, WSSMs, and SAUMs all came out at about the same time and it appears that possibly the WSMs might hang on a bit.

I'd agree.....dead in the water.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of KC Carlin
posted Hide Post
I guess I'm still treading water!
I have a model 7 in 7mmRSAUM. It is my "go to" gun for mule deer, bighorn sheep, and black bear. I used to shoot 160 gr Partitions out of it, but know I have switched to 160 gr Accubonds. It is true that there is a lack of loaded ammo for it, Remington loads it (of course) and so does the Nosler shop in Bend, OR. You can purchase loaded ammo off the internet off of their "Nosler Custom Ammunition."
It is a wonderfully accurate rifle, that has the same ballistics of a 7mmRem mag, but in a much handier and lighter package.
It doesn't seem to be very popular though. I think it should be a handloaders caliber. Kind of sounds like another Remington caliber, 8mm Rem mag doesn't it.
I love mine! Big Grin
 
Posts: 295 | Location: Oregon | Registered: 24 June 2006Reply With Quote
One of Us
posted Hide Post
kayaker I don't really see them as having much of an advantage over a .284 Winchester and they take a back seat to the 7MM Remington. Their brass is more expensive and harder to come by. I see no reason for them to last much longer.
 
Posts: 1679 | Location: Renton, WA. | Registered: 16 December 2005Reply With Quote
One of Us
Picture of brasskeeper
posted Hide Post
quote:
Originally posted by Jay Johnson:
kayaker I don't really see them as having much of an advantage over a .284 Winchester and they take a back seat to the 7MM Remington. Their brass is more expensive and harder to come by. I see no reason for them to last much longer.


One reason the 7mm suam should stick around is for the hunters who like to carry a model seven. Neither of your cartridges are chambered in that rifle.
 
Posts: 135 | Location: Central Kentucky | Registered: 05 February 2005Reply With Quote
one of us
posted Hide Post
If remington had chambered them in more of their line up they may have been more popular.

A great idea but remington just didn't get behind them ?????
 
Posts: 318 | Location: Australia | Registered: 24 November 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
I think I would like to see a saumx358, in a model 7... THAT would be neat

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40026 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
I dont believe the SAUMS were ever intended for everybody or to take over established cartridges,

You also wont see too many folk driving this 600hp ShortMagnum either.

http://www.rsportscars.com/eng/cars/kleemann_slk55ks8.asp
Like the Rem,It also only holds two in the box, but I am sure most of us could live with that. Cool
 
Posts: 2134 | Registered: 12 May 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia