THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Anyone have a 318 WR??
 Login/Join
 
One of Us
posted
Making some .330" FN's and would like to see your dimensional data.

Thanks...
 
Posts: 13301 | Location: On the Couch with West Coast Cool | Registered: 20 June 2007Reply With Quote
One of Us
posted Hide Post
Do you just want cartridge dimensions? If so I'll measure one from my collection.
Steve
 
Posts: 540 | Location: Nelson, New Zealand | Registered: 07 March 2008Reply With Quote
One of Us
posted Hide Post
You could also try this site Municion then from the menu on the left select Fuego Central & then select the group 7.65 a 8mm/3.2" & the 318 WR is about 3/4s of the way down in that group, below the 8x60S Mauser. The measurements on here are in metric but not hard to convert, divide them by 25.4 & you will get your answer in inches. They are all within 2 thou of my measurements except that my case length was about 20 thou longer, 2.39" against 2.367".
Steve
 
Posts: 540 | Location: Nelson, New Zealand | Registered: 07 March 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia