Making some .330" FN's and would like to see your dimensional data.

Thanks...

Do you just want cartridge dimensions? If so I'll measure one from my collection.
Steve

You could also try this site Municion then from the menu on the left select Fuego Central & then select the group 7.65 a 8mm/3.2" & the 318 WR is about 3/4s of the way down in that group, below the 8x60S Mauser. The measurements on here are in metric but not hard to convert, divide them by 25.4 & you will get your answer in inches. They are all within 2 thou of my measurements except that my case length was about 20 thou longer, 2.39" against 2.367".
Steve