THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Page 1 2 

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Custom 9.3x64 Brenneke
 Login/Join
 
ozhunter
One of Us
Picture of ozhunter
posted
Brought my new custom VZ24 M98 9.3x64B up to the family property for a test run this weekend.
Shoots pleasantly open sighted with Woodleigh 320grn bullets at fifty paces.






Note the targets are being raised on the hardwood backstop Roll Eyes .


Sights set for the six o'clock hold. I will file them down as it prefer them to hit dead on.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post





 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
Mark R
One of Us
posted Hide Post
Nice one Adam. Mozambique 2015 I guess?? Wink

Cheers,
Mark.
 
Posts: 557 | Location: Victoria, Australia | Registered: 13 February 2007Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
More likely Northern territory.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
Rockdoc
One of Us
posted Hide Post
Lovely looking rifle. Truly classic.

Congratulations.

Cheers, Chris


DRSS
 
Posts: 2004 | Location: Australia | Registered: 25 December 2006Reply With Quote
snowman
one of us
posted Hide Post
Very Nice indeed.
 
Posts: 2447 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
IanD
One of Us
Picture of IanD
posted Hide Post
That is a beauty!
 
Posts: 366 | Location: Alberta, Canada | Registered: 13 November 2005Reply With Quote
jens poulsen
One of Us
posted Hide Post
Nice Classic rifle!.

Thanks for sharing ozzy Smiler .


DRSS: HQ Scandinavia. Chapters in Sweden & Norway
 
Posts: 2805 | Location: Denmark | Registered: 09 June 2005Reply With Quote
.366torque
One of Us
posted Hide Post
Oh my!! She's a beauty!!!
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
Nakihunter
One of Us
Picture of Nakihunter
posted Hide Post
Nice rifle Adam.

Who did the engraving?


"When the wind stops....start rowing. When the wind starts, get the sail up quick."
 
Posts: 11420 | Location: New Zealand | Registered: 02 July 2008Reply With Quote
capoward
One of Us
Picture of capoward
posted Hide Post
Beautiful rifle Adam. What is the forend length? if you don't mind sharing...


Jim coffee
"Life's hard; it's harder if you're stupid"
John Wayne
 
Posts: 4954 | Location: Central Texas | Registered: 15 September 2007Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by capoward:
Beautiful rifle Adam. What is the forend length? if you don't mind sharing...


From where the action and barrel meet to the tip of the Buffalo horn tip it measures at nine and a quarter inches (23.5cm) which with the way I hold the fore-end is about 3" longer than I need it.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
MARK H. YOUNG
one of us
posted Hide Post
Adam,

That is really gorgeous, understated and elegant.

Mark


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 13113 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
capoward
One of Us
Picture of capoward
posted Hide Post
quote:
Originally posted by ozhunter:
quote:
Originally posted by capoward:
Beautiful rifle Adam. What is the forend length? if you don't mind sharing...


From where the action and barrel meet to the tip of the Buffalo horn tip it measures at nine and a quarter inches (23.5cm) which with the way I hold the fore-end is about 3" longer than I need it.
Thank you.


Jim coffee
"Life's hard; it's harder if you're stupid"
John Wayne
 
Posts: 4954 | Location: Central Texas | Registered: 15 September 2007Reply With Quote
Safarischorsch
One of Us
posted Hide Post
quote:
Originally posted by ozhunter:
Brought my new custom VZ24 M98 9.3x64B up to the family property for a test run this weekend.
Shoots pleasantly open sighted with Woodleigh 320grn bullets at fifty paces.




Very nice rifle and one of the absolute premium caliber...
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
Cold Trigger Finger
One of Us
Picture of Cold Trigger Finger
posted Hide Post
That's gorgeous!! . I like the bead to cover the group also and is how I filed mine on my 64. What velocity are you getting with the 320s ? Looked like a 24" ? barrel? I like the engraving. Just a really beautiful rifle you have there. Tho mine is set up similar yours is WAY PRETTIER!!


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
Velocity's with the 320grn Woodleigh and 69grns of AR2209 powder via the Walther 24" barrel is an average of 2350fpsMV.
Shot two Boar on the weekend with it;
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
steyrsteve
One of Us
Picture of steyrsteve
posted Hide Post
BINGO! You got it right. Beautiful form following precise function in a cutting edge caliber. You just made my cool dude list. Thanks for sharing this info and these photos with us.


NRA Life Member
DRSS-Claflin Chapter
Mannlicher Collectors Assn
KCCA
IAA
 
Posts: 473 | Location: central Kansas | Registered: 26 December 2013Reply With Quote
JPK
one of us
posted Hide Post
Lovely rifle.

Good looking boar too. I like the red with black spots.

JPK


Free 500grains
 
Posts: 4900 | Location: Chevy Chase, Md. | Registered: 16 November 2004Reply With Quote
Cold Trigger Finger
One of Us
Picture of Cold Trigger Finger
posted Hide Post
Beautiful!
And BACON. that's a double win! .


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
sambarman338
One of Us
Picture of sambarman338
posted Hide Post
Yes, a beautiful rifle in an exotic calibre. Expensive to feed, I should think.
 
Posts: 5188 | Location: Melbourne, Australia | Registered: 31 March 2009Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by sambarman338:
Expensive to feed, I should think.

Lucky enough to have some well priced RWS kit so with the fact that the brass should last quite some time, this should not be a problem.If it is a problem it would likely mean I have used it a lot and that would be a problem I could live with. tu2
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
sambarman338
One of Us
Picture of sambarman338
posted Hide Post
♫
"Pay more paper and laugh a lot louder" ♫

Smiler
 
Posts: 5188 | Location: Melbourne, Australia | Registered: 31 March 2009Reply With Quote
MHC_TX
one of us
posted Hide Post
Nice looking rifle. I really like the 9.3x64mm - will do "all" that one needs a medium bore to do.

Can't tell from the pictures - which front sight did you use on your rifle. Really like the profile.
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
surestrike
one of us
posted Hide Post
Lovely little rifle! Thanks for sharing it with us.



 
Posts: 5210 | Registered: 23 July 2002Reply With Quote
Cold Trigger Finger
One of Us
Picture of Cold Trigger Finger
posted Hide Post
Once the initial outlay for dies, shell holder and brass is complete. The 9.3×64 Brenneke is not much more expensive to shoot than the 62 . Brass is a little more but it's not like a prairie dog rifle. So far mine is extremely cost effective. Requiring only 1 shot for every animal I've shot with it.


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
emron
One of Us
Picture of emron
posted Hide Post
LOVELY rifle!\
Enjoy it.
 
Posts: 396 | Location: usa | Registered: 26 October 2008Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by MHC_TX:


Can't tell from the pictures - which front sight did you use on your rifle. Really like the profile.


The H&H type from Recknagel with the fold over night sight for this one
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
BaxterB
One of Us
Picture of BaxterB
posted Hide Post
I like the H&H style sight too.

I take it a .625 muzzle with a 1:12 twist?

Looks slim and trim. Have you worked up a 286 grain load yet?
 
Posts: 7832 | Registered: 31 January 2005Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by BaxterB:
I like the H&H style sight too.

I take it a .625 muzzle with a 1:12 twist?

Looks slim and trim. Have you worked up a 286 grain load yet?


I do prefer this ivory moon sight more though.

Not sure about the twist but it is a Walther barrel.
I have heaps of 320grn bullets so I'm not sure if I will bother with the 386grners.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
MHC_TX
one of us
posted Hide Post
quote:
Originally posted by ozhunter:
quote:
Originally posted by BaxterB:
I like the H&H style sight too.

I take it a .625 muzzle with a 1:12 twist?

Looks slim and trim. Have you worked up a 286 grain load yet?



I do prefer this ivory moon sight more though.

Not sure about the twist but it is a Walther barrel.
I have heaps of 320grn bullets so I'm not sure if I will bother with the 386grners.



Filing the flat angle on the front brass bead really helps illuminate the front brass bead.....not sure "why" they don't come this way......nice set up!
 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
9.3 X 75R
One of Us
posted Hide Post
You can concentrate on three different objects at 3 different distances at the same time? I am impressed.


DRSS: E. M. Reilley 500 BPE
E. Goldmann in Erfurt, 11.15 X 60R

Those who fail to study history are condemned to repeat it
 
Posts: 502 | Location: In The Sticks, Missouri  | Registered: 02 February 2014Reply With Quote
shootaway
one of us
posted Hide Post
I gave my opinion on you filing the front sight but deleted my post after being insulted by the poster above.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by MHC_TX:



Filing the flat angle on the front brass bead really helps illuminate the front brass bead.....not sure "why" they don't come this way......nice set up![/QUOTE]

To true tu2 , at least it is easy to do.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
shootaway
one of us
posted Hide Post
Well in short that may make it more difficult to see your target.An ``illuminated`` target on the other hand is the best thing one can wish for.If you still wish to do that to your bead then it will only be brighter if the sun is above you.It will make it more difficult to see if it is to the side.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by Duane Wiebe (CG&R):
Light from the side of a sphere (or top or bopttom) will tend to illuminate the side where the light hits it the most. If the light is..say from, the side, one might "think" the center of the bead is where the bead is brightest. A flat will give a round appearinbg bead no matter where the light may come from,

Filing it at slight angle, gives the oppurtunity to gather light from the most likely source most of the time ( the sun).


tu2
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by shootaway:
Well in short that may make it more difficult to see your target.An ``illuminated`` target on the other hand is the best thing one can wish for.If you still wish to do that to your bead then it will only be brighter if the sun is above you.It will make it more difficult to see if it is to the side.


Simply untrue and misleading
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
shootaway
one of us
posted Hide Post
quote:
Originally posted by ozhunter:
quote:
Originally posted by Duane Wiebe (CG&R):
Light from the side of a sphere (or top or bopttom) will tend to illuminate the side where the light hits it the most. If the light is..say from, the side, one might "think" the center of the bead is where the bead is brightest. A flat will give a round appearinbg bead no matter where the light may come from,

Filing it at slight angle, gives the oppurtunity to gather light from the most likely source most of the time ( the sun).


tu2

A round bead is already filed on every angle.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
JPK
one of us
posted Hide Post
quote:
Originally posted by ozhunter:
quote:
Originally posted by Duane Wiebe (CG&R):
Light from the side of a sphere (or top or bopttom) will tend to illuminate the side where the light hits it the most. If the light is..say from, the side, one might "think" the center of the bead is where the bead is brightest. A flat will give a round appearinbg bead no matter where the light may come from,

Filing it at slight angle, gives the oppurtunity to gather light from the most likely source most of the time ( the sun).


tu2


Best to file and then polish it!

JPK


Free 500grains
 
Posts: 4900 | Location: Chevy Chase, Md. | Registered: 16 November 2004Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by shootaway:



A round bead is already filed on every angle.


And there lies the problem. Reflection from a radius makes it less accurate to align the actual sight.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia