THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
280 rem 145 barnes lrx
 Login/Join
 
one of us
posted
Does anyone have a load that works with this bullet. I have laddered 55.0-57.0 of H4831 and just cannot make it shoot less than moa. Seat at max mag length of 3.38 or .05 off lands. Any help appreciated. This is a .5 rifle with most bullets.
 
Posts: 1324 | Registered: 17 February 2004Reply With Quote
One of Us
posted Hide Post
Some rifles just don't like some bullets.


Aim for the exit hole
 
Posts: 4348 | Location: middle tenn | Registered: 09 December 2009Reply With Quote
One of Us
posted Hide Post
Hi, MG, good to see ya here.

I loaded some of these in my No 3 .280 last summer and with Fwt. Krieger at 23", got nice groups and just under 3000 fps. IIRC, old brain, ya know!

I am using Magpro and RE-26 now in this rifle, and RE-26 in my KMA .280AI.....THE "mountain rifle" for serious BC backpack hunting.

I will dig the ammo out later today and check the actual specs. I loaded to. I love 7mms, the non-magnum ones and .270s are in there too.
 
Posts: 100 | Registered: 31 December 2014Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by muygrande:
Does anyone have a load that works with this bullet. I have laddered 55.0-57.0 of H4831 and just cannot make it shoot less than moa. Seat at max mag length of 3.38 or .05 off lands. Any help appreciated. This is a .5 rifle with most bullets.


barnes manual says -0.065 to get started, and move them back to improve accuracy --- which is also my advice, any rifle that doesn't like mono bullets, move them back -0.005 at a time .. if it doesn't get better by -0.085, the gun may just not like them


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40030 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
I have owned half a dozen 280's and one 280 Ackley and a couple 7x64's . IMR 4831 has always been my go to powder to start. RL23 is also very good with heavier bullets. I think the new IMR 4955 could also be good.
 
Posts: 2443 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
one of us
posted Hide Post
I appreciate the input gents. Have loaded a few with various seating depths and see how that works.
 
Posts: 1324 | Registered: 17 February 2004Reply With Quote
One of Us
posted Hide Post
Changing primers can make big difference sometimes also. I ran some tests one time on three rifles that "bugholed" specific loads...groups changed from bugholes to 1 1/4" groups by going from BR style primers to standard LR, then mag primers.

And...Yes...some rifles just don't like mono's...Neither my 6mm-284 nor 243 Win will shoot Barnes ANY WEIGHT 6mm...starting with a clean BBL or a dirty one.

But...my 6 BR UGLY NEF stubby loves the 6 mm Barnes TXS's which are basically FMJ's with the velo in that 16" bbl.

LUCK beer
 
Posts: 1211 | Registered: 25 January 2014Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia