THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
26mm Rings for Brno & CZ
 Login/Join
 
one of us
posted
Where can I find 26mm rings for my Brno M21?
Lynx and Bsqare do not make them any more.
/Johan
 
Posts: 87 | Location: Sweden | Registered: 14 September 2001Reply With Quote
one of us
Picture of GBF
posted Hide Post
EAW and Talley make them. EAW are quite expensive though, 309 Euro from Frankonia.

Regards
 
Posts: 392 | Location: Insula Thule | Registered: 03 January 2003Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Talley no longer makes them. You can find Leupolds in some styles. If you have a thicker 1" you can line bore them out to 26MM (about 1.02).
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
<eldeguello>
posted
I "made" a pair of 26mm rings for a Ruger No. 1. I just used Ruger 1" rings, a piece of emery cloth, and a large wooden dowel to back it with. Just kept "cutting & trying" until the rings fit with just a little space showing between the flats where the halves meet. Worked O.K.! I believe there's enough material in the pair of medium-height CZ 527 rings I just bought to permit the same treatment.

There's only 0.02362" difference between a 26mm hole and a 1" hole! Just enough to prevent you from using 1" rings, dammit!!
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia